My Cart

Diesel refuelling pump

Model Number
VR100-1122
$521.00
Jabsco VR100-1122 Diesel refuelling pump

Jabsco VR100-1122

Jabsco rotary vane pump for diesel fuel and other fuel oils. Designed for refuelling small sizes diesel powered vehicles 50 gal. from drums. Suitable for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.

Suitable for diesel fuel, Kerosene, Paraffin,Hydraulic oils, Oils up to 150 centi-Stokes (750Saybolt Universal) viscosity

  • Temperature Range: -30C to +50C (-22F to +122F)
  • Pump Body: Cast Iron
  • Rotor: Sintered Iron
  • Vanes: Sintered Bronze
  • Shaft: Stainlee Steel
  • Seal: Nitrile Lip Seal
  • Ports: Vertical 1" BSP or 32m hose adaptors (1 1/4")
  • Motor: 24V DC permanent magnet, thermal overload & IP55 protected
  • Duty: Continuously rated up to 6 metres (20ft), total head for diesel fuel at 20C (68F)
More Information
Model Number VR100-1122
Series Diesel Refuelling Pumps
Max Flow (GPM.) 26
Max Flow GPH 1560
TDH Maximum (Ft) 49
TDH Maximum (PSI) 21
Horsepower (IE .5, 1, 1.5, 20) 0.1600
Inlet Connection Type Barb
inlet size 1 ¼"
Inlet (In.) 1.3
Outlet Connection Type Barb
Outlet (In.) 1.3
Wetted Materials Aluminum, PPS-Ryton
Elastomers / O-ring Buna-Nitrile
Voltage (V) 24DC
Voltage (Range) 12/24/36 VDC
Motor TENV
Speed (RPM.) 1725
Self Priming Yes
Suction Lift (FT.) 6
Max Operating Temperature (F) 80
Viscosity SAE 10 oil 88.00 cp 500.00 ssu
Shaft Steel
Mechanical Seal LIP TYPE
Mechanical Seal Type Single
Coupling Y
Other 25 minute duty cycle. Suction strainer 300 micron recom. Do not run dry.

WARNING: Explosion hazard. Do not pump gasoline, solvents, thinners or other flammable liquids. To do so can cause an explosion resulting in injury or death.

Approvals CARB, ETL, SSPMA
Pump Bearing Rulon
Low Oil Shutdown Yes
Impeller Material plastic
Duty Continouos
Drain Yes
Port Rotation Yes
Weight (Lbs) 20.000000
Warranty (YRS.) 1
>