Dewatering Pump 7.5HP
Series (37 Models):
Product Name:Dewatering Pump 7.5HP
Suitable for countless applications including water features, construction, mining, utilities, industrial, marine, cistern and more. High/Low head and capacity are interchangeable by merely changing impeller and discharge outlet. Cutting-edge designed double casing with circumferential liquid flow system to achieve superior cooling effect.
Well type pre-dewatering of building sites or pipelines, sumpingand dewatering of coffer dams, caissons, and tunnels. Dewatering of non-gassy underground and open pit mines. Dewatering of manholes and transformer vaults, and for construction crews and emergency service. General clean up in factories and removal of water from tanks, sumps, and truck docks. Shipboard dewatering of cargo holds and tanks, damage control or ballast transfer, and general use in shipyards, rydocks and offshore rigs.
3" discharge models also available.
High chrome steel impeller is extremely hard and wear resistant.
Stainless steel case, shaft, and strainer.
SS double casing allows water to flow past the motor and reduce heat.
Continuous duty design.
Double mechanical seal, SiC
33FT power cord.
|Series||FS Dewatering Pump 100 to 650gpm|
|Max Flow (GPM.)||470|
|Max Flow GPH||28200|
|TDH Maximum (Ft)||77|
|TDH Maximum (PSI)||33|
|TDH BEP (FT.)||40.000000|
|Horse Power (HP)||7 1/2|
|Horsepower (IE .5, 1, 1.5, 20)||7.5000|
|Outlet Connection Type||MNPT|
|Elastomers / O-ring||Buna-Nitrile|
|Phase (Ø)||Three (3)|
|Max Operating Temperature (F)||104|
|Viscosity||Milk 3.20 cp 40.00 ssu|
|Mechanical Seal Face||SiC|
|Mechanical Seal Type||Double|
|Other||33ft cable. Oil filled. No plug. 11.2" Diameter.|