Dewatering Pump 10HP
-
Manufacturer:
-
Series (37 Models):
-
Product Name:Dewatering Pump 10HP
-
Model Number:MUFS675T44
Model Number
MUFS675T44
$6,857.00
Munro MUFS675T44
Suitable for countless applications including construction, mining,
utilities, industrial, marine, cistern and more. High/Low head and
capacity are interchangeable by merely changing impeller and
discharge outlet. Cutting-edge designed double casing with
circumferential liquid flow system to achieve superior cooling
effect.
High/Low head and capacity are interchangeable by merely changing impeller and discharge outlet. Well type pre-dewatering of building sites or pipelines, sumpingand dewatering of coffer dams, caissons, and tunnels. Dewatering of non-gassy underground and open pit mines. Dewatering of manholes and transformer vaults, and for construction crews and emergency service. General clean up in factories and removal of water from tanks, sumps, and truck docks. Shipboard dewatering of cargo holds and tanks, damage control or ballast transfer, and general use in shipyards, rydocks and offshore rigs.
Model Number | MUFS675T44 |
---|---|
Series | FS Dewatering Pump 100 to 650gpm |
Max Flow (GPM.) | 647 |
Max Flow GPH | 38820 |
TDH Maximum (Ft) | 98 |
TDH Maximum (PSI) | 42 |
TDH BEP (FT.) | 45.000000 |
Horse Power (HP) | 10 |
Horsepower (IE .5, 1, 1.5, 20) | 10.0000 |
Outlet Connection Type | MNPT |
Outlet (In.) | 6 |
Wetted Materials | SS-Plastic |
Elastomers / O-ring | Buna-Nitrile |
Voltage (V) | 460 |
Voltage (Range) | 460-480 |
Phase (Ø) | Three (3) |
Motor Frequency | 50/60 |
Motor | Hermetically Sealed |
Speed (RPM.) | 3450 |
Self Priming | Yes |
Max Operating Temperature (F) | 104 |
Viscosity | Milk 3.20 cp 40.00 ssu |
Shaft | 416SS |
Length (In.) | 33.200000 |
Mechanical Seal | No |
Mechanical Seal Face | SiC |
Mechanical Seal Type | Double |
Other | 33ft cable. Oil filled. No plug. 13.8" Diameter. |
Drain | Yes |
Port Rotation | Yes |
Weight (Lbs) | 300.000000 |
Warranty (YRS.) | 1 |
>