DB5.5 Magnetic pump Polypro
-
Model Number:
DB5.5P-M615
-
Product Name:DB5.5 Magnetic pump Polypro
-
Manufacturer:
-
Series (35 Models):
Metric motor 50/60 Hz TEFC 1/4 Hp (0.19 kW) 230V, 1 Ph,
Model Number
DB5.5P-M615
$588.78
Finish Thompson (FTI) DB5.5P-M615
Magnetic coupled pump.
- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation with IEC motor with base
- Back pullout design
- Mounts to NEMA and IEC motor frames
- Replaceable shaft
- ISO 1940 G2.5 balancing
- CE certified/ATEX available
- Working pressure up to 90 psi (6.2 bar) or 50 psi (3.5 bar) with Gylon® gasket
- Specific gravity over 1.8
- Viscosity up to 150 cP
- Polypropylene—180o F (82o C)
Used for: Chemical processing, Plating, Water and wastewater, Electronics,Pharmaceuticals, Wet scrubber, Pulp and paper, Heat exchanger
| Model Number | DB5.5P-M615 |
|---|---|
| Series | DB Magnetic Chemical Pump FTI |
| Max Flow (GPM.) | 138 |
| Max Flow GPH | 8280 |
| TDH Maximum (Ft) | 31 |
| Horse Power (HP) | 1/4 |
| Horsepower (IE .5, 1, 1.5, 20) | .25 |
| Inlet Connection Type | FNPT |
| Inlet (In.) | 1 |
| Outlet Connection Type | MNPT |
| Outlet (In.) | 0.75 |
| Wetted Materials | PolyPro-GF |
| Elastomers / O-ring | FKM |
| Voltage (V) | 230 |
| Voltage (Range) | 220-240 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | TEFC |
| Speed (RPM.) | 3450 |
| Motor Frame | 56C |
| Self Priming | Yes |
| Max Operating Temperature (F) | 180 |
| Max Specific Gravity | 1.000000 |
| Max Particle Size (In) | .1 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | FRP |
| Mechanical Seal | No |
| Mechanical Seal Type | Single |
| Motor Bearings | Ball |
| Impeller Size (IN.) | 3 inch |
| Coupling | Y |
| Rotation | cw |
| Pump Bearing | Carbon/graphite |
| Impeller Material | PolyPro, closed |
| Cord Length (Ft.) | 0 |
| Duty | Continuous |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 30.000000 |
| Warranty (YRS.) | 5 |
| GPM Of Water At 50 Feet Of Head | 92 |
| GPM Of Water At 70 Feet Of Head | 55 |
>
FTI is a leading world class pump manufacturer in Erie, PA. FTI has built its product lines around cutting edge design and manufacturing processes culminates in their having ISO certification.
You May Be Interested In
