Clean-O-Matic parts washer 42g
-
Model Number:
500-A
-
Product Name:Clean-O-Matic parts washer 42g
-
Manufacturer:
-
Series (5 Models):
Graymills 500-A
The Model COM504-A (new model no.) features the same tank as the 300 with a more powerful 1/3 HP centrifugal pump and hydro-jet manifold. Pump flow capacity is 40 GPM through the manifold or 18 GPM through the flexible metal tube.
The Industry Standard for more than 50 years
Ruggedly constructed for years of trouble-free solvent cleaning service. These feature-packed models offer a variety of design elements to make your cleaning tasks quicker and more efficient while remaining flexible enough to suit most cleaning challenges. All Clean-O-Matics are certified cETLus to the NEW UL1204 Parts Washer Standard.
Designed with no bearings or seals immersed in the liquid, pumps are virtually abrasive-resistant. Pump discharge jet creates tank agitation to loosen dirt and grime as parts soak.
New Names for Old Friends
With the introduction of the UL1204 models comes some slight tweaks to the units. There were enough changes to them that a name change was necessary.
Solvent Parts Washers
Ideal for cleaning of metal, plastics and painted surfaces. Grease, motor oil, cutting oil and water soluble oils are removed with ease. Gummy deposits unaffected by ordinary mineral spirits are readily softened or removed. Use of Graymills’ Agitene line of products is recommended.
Standard Features - All Models
- Pistol grip spray nozzle is adjustable for light spray or solid stream – direct where cleaning and rinsing of parts is needed
- Available in both 115V (-A) and 230V (-B)
-
Extra-long Stay-Put flexible metal flush hose for directed hands-free flushing action
-
Adjustable bi-level work shelves
-
Safety lid shuts automatically in the event of a fire – can also be closed to reduce fluid evaporation
-
Hydro-Jet Manifold in-tank agitation loosens dirt and grime as parts soak (except 304)
-
Three-way cleaning action selector valve (all models except 304) permits use of hydro-jet manifold for in-tank agitation, pistol grip spray nozzle or flush hose cleaning actions individually or in combination
-
Washable 40 mesh screen solvent filter
-
Drain plug
-
Optional removable soak/sludge trays keep soaking parts off bottom – makes sludge removal easier
-
Rugged 16-gauge minimum welded steel tank leak tested for 24 hours after welding with powder-coat finish for durability and long-life
-
Graymills abrasive-resistant pump has no bearings/seals immersed in fluid – extends pump life
-
Freeboard compliant when lower shelves are installed and fully extende
Model Number | 500-A |
---|---|
Series | Clean-O-Matic Parts Washer |
Max Flow (GPM.) | 40 |
Max Flow GPH | 2400 |
Horse Power (HP) | 1/3 |
Horsepower (IE .5, 1, 1.5, 20) | 0.3300 |
Wetted Materials | 304SS, Steel |
Voltage (V) | 115 |
Voltage (Range) | 110-120 |
Phase (Ø) | Single (1) |
Motor Frequency | 60 |
Max Operating Temperature (F) | 80 |
Viscosity | Water 1.00 cp 31.00 ssu |
Mechanical Seal | No |
Other | Carbon Steel tank has a liquid capacity of 42 gallons |
Country of Manufacture | United States |
Weight (Lbs) | 260.000000 |
Warranty (YRS.) | 1 |