10 GPM CI GEAR PUMP & PED
-
Model Number:
10GB1111S
-
Product Name:10 GPM CI GEAR PUMP & PED
-
Manufacturer:
-
Series (2 Models):
Model Number
10GB1111S
$1,013.00
Oberdorfer 10GB1111S
Medium duty CI gear pump with relief valve and pedistal for long
coupling. Mechanical sealed, bronze bearings. CW rotation.
b>Features:
- Shafts: Ground and polished steel.
- Helical Gears: For quiet running.
- Housing: Of close grain cast iron. Three section double weled design insures alignment, efficiency and ease of field service.
- Bearings: Full face thrust bearings in bronze.
- Seals: Mechanical seal of Buna
- Pump is self priming due to close manufacturing tolerances.
- Suction lifts up to 20 feet based on fuel oil 70ï½°F.
- Optional extended shaft available to accommodate separate outboard bearing for pulley drive.
For presssure, flow rates and required HP at various viscosities, click performance graph.
Model Number | 10GB1111S |
---|---|
part number | 10GB1111S |
Series | GearIron Gear Pump |
Max Flow (GPM.) | 10 |
Max Flow GPH | 600 |
TDH Maximum (Ft) | 250 |
TDH Maximum (PSI) | 108 |
Inlet Connection Type | FNPT |
inlet size | 1" |
Inlet (In.) | 1 |
Outlet Connection Type | FNPT |
Outlet (In.) | 1 |
Wetted Materials | Bronze, Cast Iron |
Elastomers / O-ring | Buna-Nitrile |
Self Priming | Yes |
Suction Lift (FT.) | 20 |
Max Operating Temperature (F) | 225 |
Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
Shaft | Steel |
Length (In.) | 13.430000 |
Mechanical Seal | No |
Mechanical Seal Face | Carbon-ceramic |
Mechanical Seal Type | Single |
Other | Rotation is clockwise when facing shaft end of pump. Required HP is determined by flow, pressure and viscosity of liquid. Not for propane. |
Drain | No |
Port Rotation | Yes |
Country of Manufacture | United States |
Weight (Lbs) | 22.000000 |
Warranty (YRS.) | 1 |
>