2 HP MVP Multi-stage coolant pump
-
Model Number:
MVP8
-
Product Name:2 HP MVP Multi-stage coolant pump
-
Manufacturer:
-
Series (3 Models):
230/460v
Model Number
MVP8
$2,067.50
Graymills MVP8
Machining coolant pump MVP’s steady, pulsation-free
coolant flow permits greatly increased feed rates while preventing
thermal shock to cutting tools. The multi-stage construction offers
the ability to cost-effectively match the pump to your application
for pressures up to 326 psi and flows up to 28 gpm. Stainless steel
impellers, housing, shaft and intake provide corrosion resistance
and robust construction for long service life. A 1”
NPT discharge simplifies plumbing, and the ability to mount the
pump both horizontally and vertically without loss of performance,
making the MVP the most versatile high pressure pump on the
marketplace. The cast iron frame and coupling provide a rugged
interface between motor and shaft, resulting in a solid connection
that eliminates vibration.
Model Number | MVP8 |
---|---|
Series | MVP High Pressure Coolant Pump |
Max Flow (GPM.) | 26 |
Max Flow GPH | 1560 |
TDH Maximum (Ft) | 290 |
TDH Maximum (PSI) | 125 |
Horse Power (HP) | 2 |
Horsepower (IE .5, 1, 1.5, 20) | 2.0000 |
Outlet Connection Type | FNPT |
Outlet (In.) | 1 |
Wetted Materials | CI-SS |
Elastomers / O-ring | EPDM |
Voltage (V) | 230/460 |
Voltage (Range) | 220-240/460-480 |
Phase (Ø) | Three (3) |
Motor Frequency | 60 |
Motor | TEFC |
Speed (RPM.) | 3450 |
Self Priming | Yes |
Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
Mechanical Seal | No |
Mechanical Seal Type | Single |
Motor Bearings | Ball |
Other | Do not operate below 5gpm, use a by-pass on discharge piping. Length above is "B" length which is distance below the mounting plate. See dimensional drawing for complete dimensions. |
Impeller Material | SS, closed |
Cord Length (Ft.) | 0 |
Duty | Continuous |
Drain | Yes |
Port Rotation | Yes |
Country of Manufacture | United States |
Weight (Lbs) | 50.000000 |
Warranty (YRS.) | 1 |
GPM Of Water At 200 Feet Of Head | 15 |
>