Brass Impeller QP30 sprinkler pump
-
Model Number:
20603B000K
-
Product Name:Brass Impeller QP30 sprinkler pump
-
Manufacturer:
Brass Impeller
Model Number
20603B000K
$594.00
Myers 20603B000K
Impeller 20603B for Myers QP30 sprinkler pump. Picture shows the
Noryl plastic impeller, but the QP-30 only comes in brass.Quick
Prime QP Self-Priming Centrifugal pumps are designed for demanding
jobs where a lot of water is required over a long period of time.
Ruggedly built to meet the demands for long, hard continuous
service without overworking or overloading the motor.
3 HP , impeller is a NO lead brass.
See Performance chart for flow / pressure at various suction lifts.
For Pump End Only kit for field assembly to customer motor, NO MOTOR included see QP30-Kit. Parts and operation manual can be found below under the IMAGE tab as a PDF.
NOTE: The impellers UNSCREW, standard right hand thread
| Model Number | 20603B000K |
|---|---|
| Max Flow (GPM.) | 104 |
| Max Flow GPH | 6240 |
| TDH Maximum (Ft) | 120 |
| TDH Maximum (PSI) | 51 |
| Inlet Connection Type | FNPT |
| Inlet (In.) | 1.5 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1.5 |
| Wetted Materials | CI-Brass |
| Elastomers / O-ring | Buna-Nitrile |
| Speed (RPM.) | 3450 |
| Motor Frame | 56J thrd |
| Self Priming | Yes |
| Suction Lift (FT.) | 25 |
| Max Operating Temperature (F) | 110 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Mechanical Seal | TYPE 21 |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Coupling | N |
| Other | 1/4" drain plug installed at bottom of casing. Cast Iron parts are enamel coated inside and out. |
| Impeller Material | Brass, closed |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 5.000000 |
Supporting Docs
Supporting Docs
