My Cart

Sewage & Effluent Pumps - Industrial

Commercial & Industrial Sewage & Wastewater Pumps

Pumpbiz provides sewage pumps, non-clog Effluent pumps for Industrial / Commercial submersible heavy duty applications Non-clog sewage pumps also come in packaged pump systems with basin and rails.

Submersible Sewage and Effluent pumps come in single and three phase, all voltages, as well as a range of horsepower (from ½ HP to 30 HP), and various pressure and flow rates. These commercial sewage pumps include heavy duty long power cords but most often no plugs.

PumpBiz can also provide a Rhombus pump control panel for these pumps.

Top selling Sewage & Effluent Pump Brands include Barnes,  Barmesa, Ebara

Sewage Pumps

Sewage pumps are designed to handle wastewater with suspended solids trash up to 2 inches. These pumps are designed to work with toilet waste discharge. Grinder Pumps are sewage pumps with grinder blades to reduce solids. Grinder sewage pumps start at 2HP.

Effluent Pumps

Effluent pumps, or gray water pumps, are made for discharging water with a moderate amount of solids suspended. These pumps can handle smaller size solids and are used in septic systems, or sump pits which do not have a toilet connected. Typical Effluent Pump applications handle solids up to roughly ¾ inch.

See this page for Self Priming Trash pumps gas and electric

 

View as List Grid

8 Items

Set Descending Direction
per page
  1. Barnes

    Non-Clog Submersible w/o float

    SE1074L

    $2,017.00
    Submersible NON-CLOG pump, 2" spherical solids handling. Does not include float switch. 15 ft. cord. All cast iron, including impeller. 104888
    104888 Learn More
  2. Barnes

    Sewage pump 1hp

    2SEV1092L

    $2,635.00
    Barnes submersible Cast iron sewage pump. Cast iron 2 vane, open impeller with pump out vanes on back for use in sewage applications. 25ft cord, oil filled seal reservoir and motor housing is completely oil filled.
    1HP/200/230v/3ph/3450 Learn More
  3. Barnes

    Vortex Pump w. dbl. seal 1hp

    3SEV1092DS

    $3,150.00
    Barnes sewage Submersible NON-CLOG vortex Pump, handles 2" spherical solids, Vortex recessed impeller, double seal. Designed for raw sewage, dewatering and wet mud applications. All cast iron construction. 15 ft. cord and plug.

    Pump may be ope...

  4. Barnes

    Vortex pump, Sgl seal

    3SE1094L

    $2,555.00
    Submersible non-clog sewage pump designed for typical raw sewage applications. Barnes SE series sewage pumps are built for long life and superior performance with upper & lower ball bearings, continuous-duty motor, mechanical seal, cast-iron ho...
    104911 Learn More
  5. Barnes

    Sewage pump 3"

    3SE1074L

    $2,317.00
    Submersible non-clog sewage pump designed for typical raw sewage or non-clog applications.104910
    1HP 230v/1 Learn More
  6. Barnes

    Non-Clog Submersible w/o float

    SE1094L

    $2,235.00

    Submersible NON-CLOG pump 2SE1094L,

    2" spherical solids handling. Does not include float switch. 15 ft. cord. All cast iron, including impeller. Barnes SE series sewage pumps are built for long life and superior performance with upper & lower bal...

    208/240v/1 2" 1HP Learn More
  7. Barnes

    Submersible non-clog sewage pump

    2SEV1094DS

    $3,055.00
    Barnes 2SEV-DS submersible non-clog sewage ejector pump isdesigned for typical raw sewage applications. This pumps is also used to pump trash. Often used in parking lots and at bay doors.
    • Double Seal
    • Vortex (non-clog) Impeller
    • Handles 2" sp...
  8. Barnes

    Submersible non-clog sewage pump

    2SEV1092DS

    $3,034.00
    Barnes 2SEV-DS submersible non-clog sewage ejector pump isdesigned for typical raw sewage applications. This pumps is also used to pump trash. Often used in parking lots and at bay doors.
    • Double Seal
    • Vortex (non-clog) Impeller
    • Handles 2" sp...
    1hp/200/230v/3ph/3450 Learn More
View as List Grid

8 Items

Set Descending Direction
per page