Gear Pumps
Gear pumps, or rotary gear pumps,
are positive displacement (or fixed displacement), meaning they pump a constant amount of fluid for each revolution. Hypro, Oberdorfer gear pumps come in Cast Iron,Stainless Gear pump and Bronze. These pumps are for thick / high viscousity to water like liquids.
Sizes of our gear pumps range from 1/4" - 2" in size and are available with electric motors or bearing pedestal mount for local drive units.
Gear pumps have limited self priming abilities and should not run dry or handle any abrasives. The electric motors come in single or three phase along with Explosion proof.
Used for pumping oils, soaps, fuel and chemicals. Gear pumps are capable of high pressure but at low flow rates. The size of the electric motor depends directly to the output pressure. Flow is generally steady and no pulsation.
-
Graco Pumps
EGP Transfer Pump 12v
25T819
$1,700.00Choose cost-saving convenience with the all-new Graco EGP electric pumps. Attach the EGP transfer pump directly to roll-around barrels for more mobility in more places. These pumps offer the same powerful, high-quality performance you’ve come to...
12VDC Learn More -
Oberdorfer Pumps
Bronze Rotary Gear Pump w/ motor & relief valve
N990RH-N76
$3,506.10Oberdorfer Close coupled bronze rotary gear pumps.- Bronze Construction with SS shaft
- Helical gears for quiet operation
- Self-lubricating carbon bearings
- O-ring seal for max. leak protection
- The pump drive shaft is connected to the motor shaf...
