My Cart

Dewatering Pumps for Sale

The terms Dewatering Pumps and Utility Pump are often used interchangeably by contractors and pump retailers. While any pump is technically dewatering, in that they are moving water from one location to another, within the industry, the term typically applies to certain applications.

Dewatering pumps tend to be used in temporary situations such as flooding or removing water from a construction site. Since most utility or dewatering pumps are intended to run for short amounts of time until the water is removed, and then turned off manually, they tend to not have automatic shutoff switches. However, we do have some submersible utility pumps with float switches.

Dewatering Pump Power sources

The power for the dewatering pumps can be supplied by gas, diesel or electric motors.

The horse power for dewatering pumps ranges from 1/6HP to 30HP. Our dewatering pumps are typically powered by Honda, Briggs, or Yanmar engines. Depending on the configuration, some engines have an electronic start.

Dewatering Pump Output Size

Dewatering pumps come in 1-1/2", 2" and 3" outlets. PumpBiz also provides hoses and quick release couplings for utility/dewatering pumps.

 

View as List Grid

Items 11-20 of 30

Set Descending Direction
per page
Page
  1. Berkeley Pumps

    LTH-3 Self Priming Pump

    S40094

    $4,636.00

    Some of the fastest priming pumps on the market. Available in high head (TH) or medium head (LTM) Series. Feature leak-proof mechanical seals, easy service design, havy-duty motors, and rugged construction.Available in 3 and 5 HP models LTH Ser...

    LTH 3hp 230v Learn More
  2. Power-Flo Pumps

    6" Submersible Dewatering Pump Contractor

    PF60112

    $16,878.55
    Submersible Dewatering Pump for utility & below ground contractor. Contractor heavy duty construction quality at a light weight. Pump suction is Hard Anodized Aluminum with wear resitant polyurethane liner. 50FT power cord with NEMA 3R control bo...
    Dewatering 6HP 230v w/ control box Learn More
  3. Barnes Pumps

    Submersible Pump 3hp

    3SE3034L

    $4,710.00

    Barnes Submersible Non-Clog sewage pump 3", cast iron construction.

    2 vane, open impeller with back pump out vanes. Dynamically balanced. Oil filled squirrel cage induction motor. Oil lubricated upper and lower motor ball bearings for continuous ...

    3hp 230v/3ph/1750 Learn More
  4. Tsurumi

    Tsurumi Submersible Pump HS3.75S-61 230v

    HS3.75S

    $699.00
    Tsurumi Submersible Sand Trash Pump. Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used in Florida to d...
    1HP 230v/1 Learn More
  5. Monarch

    FBSE-200 pump BSE

    92931020

    Call For Price
    Self priming centrifugal water pump with built-in check valve. Casing: Cast Iron; 2" NPT suction & discharge; semi-open impeller Motor: CSA approved; equipped with stainless steel shaft and automatic thermal overload protection. Square flange ...
    2HP 115/230v Learn More
  6. Barnes Pumps

    Submersible Sewage Pump 2hp

    3SE2022L

    $4,182.00
    Barnes submersible Cast iron sewage pump. Cast iron 2 vane, open impeller with pump out vanes on back for use in sewage applications. 25ft cord, oil filled seal reservoir and motor housing is completely oil filled.

    Pump may be operated DRY for...

    132848 Learn More
  7. Barnes Pumps

    Submersible Sewage pump 1hp

    2SEV1022L

    $2,573.35
    Submersible sewage pump. Barnes sewage 2SEV submersible NON-CLOG pump, handles 2" spherical solids due to its unique vortex impeller design. All cast iron heavy duty design. Includes 20ft line cord.
    230v/1 2" Learn More
  8. Munro Pumps

    Dewatering Pump 30HP

    MUFS6220T22

    $18,190.00
    Suitable for countless applications including construction, mining, utilities, industrial, marine, cistern and more. High/Low head and capacity are interchangeable by merely changing impeller and discharge outlet. Cutting-edge designed double...
  9. Barnes Pumps

    Submersible Non-Clog Sewage Pump

    SE52

    $1,533.31
    Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Bolt on threaded discharge flange. NO FLOAT switch 104874
    • Handles 2" spherical solids
    • Includes 15' Cord w/o plug
    • Pump may NOT be operated DRY f...
    230v/1 1/2HP Learn More
  10. AMT Pumps

    Cast Iron Submersible Contractor pump

    5771-95

    $1,900.00
    Submersible dewatering pump
    • AMT Submersible Contractor Pumps are intended for use in residential, commercial and industrial settings. Applications include: Construction sites, waste water, storm water, farming, irrigation, excavation, mini...

    1HP 230v/1 Learn More
View as List Grid

Items 11-20 of 30

Set Descending Direction
per page
Page