Coolant Pump
Coolant Pump OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron or stainless pump. Ideal for coolant and lubrication systems, parts cleaners. Sacemi pumps can be replaced with these.
IMS** models are dependable, economical replacements for suction pumps commonly supplied as original equipment on foreign manufactured machine tools. They should not be used to circulate fluids containing fine contaminants. For applications requiring the circulation of liquids containing large amounts of foreign matter, Graymills IMV Series centrifugal pumps are recommended.
pumps are interchangeable with comparable models of Fuji, Gusher, Haas, Mitsibishi, Toshiba, AMT, Hitachi & Yasukawa.
-
Graymills Pumps
17 gallon rectangular 3/4 HP
X17-TN33HF
$1,860.76Tanks are constructed of 16 gauge steel with one or two baffles depending on pump. Tank has a chip basket in lid which is removeable. Chip basket has a weir for collecting chips from the coolant stream. Graymills pumps are typically found on OEM ... -
Pedrollo Pumps
Turbine pump 3/4HP
PKH07A16S
$967.29Turbine Pump, Peripheral pump, clear water pump.They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materialsfrom which the pump is made. For their reliability, simplic...
3/4HP 115v High Pressure Learn More -
AMT Pumps
Heavy Duty Coolant Pump
4440-95
$1,044.44The AMT Heavy Duty Industrial Coolant pump has been designed for a broad range of Industrial/Commercial coolant and recirculating applications. All models with extended shafts are fitted with aligning coupling between motor and shaft. A Univers...3/4 HP 115/230V Learn More -
AMT Pumps
Coolant Pump
4441-95
$1,044.44The AMT Heavy Duty Industrial Coolant pump has been designed for a broad range of Industrial/Commercial coolant and recirculating applications. All models with extended shafts are fitted with aligning coupling between motor and shaft. A Univers...
3/4 HP 230/460V Learn More -
AMT Pumps
Heavy Duty Coolant Pump
4442-95
$1,107.13The AMT Heavy Duty Industrial Coolant pump has been designed for a broad range of Industrial Commercial coolant, water curtain paint booths and recirculating applications. If you have machining lubricants and need to circulate them, these are t...
3/4 HP 115/230V Learn More -
AMT Pumps
Heavy Duty Coolant Pump
4443-95
$1,076.31The AMT Heavy Duty Industrial Coolant pump has been designed for a broad range of Industrial/Commercial coolant and recirculating applications. Back vanes on the impellers of models 4421-95 through 4443-95 balance pressure and thereby eliminate...
3/4 HP 230/460V Learn More -
Graymills Pumps
Vertical Parts Washer Pump
TN57E 3/4
$1,459.45Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron...3/4HP 115v/230v Learn More -
Graymills Pumps
17 gallon rectangular 3/4 HP
X17-TN33HE
$1,886.76Tanks are constructed of 16 gauge steel with one or two baffles depending on pump. Tank has a chip basket in lid which is removeable. Chip basket has a weir for collecting chips from the coolant stream. -
Graymills Pumps
55 gallon rectangular tank systems 3/4 HP
X55-TN56 F
$2,505.28Machine tool coolant pump & tank system.
Graymills 3/4HP 55g coolant tank systems are common on many OEM machine tools and as replacements to collect coolant fluid and strain out the chips and debris for re-use. Made in USA. Steel tanks are low p...
230/460v 3/4HP Learn More -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TN58E 3/4
$1,486.26Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron...
