Boiler Feedwater Pump
Boiler feedwater pump is a specific type of pump used to pump
feedwater into a steam boiler. The water may be freshly supplied or
returning condensate produced as a result of the condensation of
the steam produced by the boiler. These pumps are normally high
pressure units that use suction from a condensate return system and
can be of the centrifugal pump type.
Quick rule of thumb is that 1/10 of a gallon is needed for every boiler horsepower. ASME code requires that you furnish feedwater to your boiler at 3% higher than what the relief valve setting is on the boiler.
-
Pulsafeeder
Metering Pump 3 GPD/300 PSI
LPK2SA-PTC1
$1,791.74The Series E Plus offers manual control over stroke length andstroke rate as standard. 3 GPD / 0.47 LPH / .125 GPH- 20 flow/pressure envelops
- 100:1 turn down ratio
- Auto-off-Manual selection switch with indicator lights
- Built in fuse
- Clear h...
Manual Learn More -
Pulsafeeder
Metering Pump 42 GPD/150 PSI
LPG4SA-PTC1
$1,480.86The Series E Plus offers manual control over stroke length andstroke rate.- 20 flow/pressure envelops
- 100:1 turn down ratio
- Auto-off-Manual selection switch with indicator lights
- Built in fuse
- Clear hinged cover over controls for water resistance...
-
MTH Pumps
Regenerative Turbine Pump 1.5HP
T31FAB153TB
$1,413.18The T31 Series closed close-coupled regenerative turbine pumps represent the most economical, high performance alternative for low flow (1 to 9 GPM) applications involving moderate to high pressures (heads to 300 feet). T31 impellers utilize bala...
