60 in. Polypropylene Drum Pump for Corrosive fluids (caustics, acids, salts)
-
Model Number:
PFP-60
-
Product Name:60 in. Polypropylene Drum Pump for Corrosive fluids (caustics, acids, salts)
-
Manufacturer:
-
Series (14 Models):
PolyPro Drum pump 60"
Model Number
PFP-60
$692.45
Finish Thompson (FTI) PFP-60
Barrel Pump, 60" IBC Chemical Industrial Drum Barrel Pump PFP - Polypropylene drum pumps for corrosive liquids: acids, caustics, salts, plating solutions, corrosives, chemicals to 500 cPs. Pump only. Shaft is INCONEL® alloy 625. Drum pump Motor must be ordered separately. Often motor is A100005.
IBC / Tote Barrel pump is high flow design with double suction impeller. Pump tube can be used with interchangeable motors. Unique design allows for limited dry run capability. Order motor separately Finish Thompson pumps are made in the USA.
Series: Chemical Industrial Drum Pump
| Model Number | PFP-60 |
|---|---|
| part number | DPFP032 |
| Series | Finish Thompson Chemical Industrial Drum Pump |
| Max Flow (GPM.) | 40 |
| Max Flow GPH | 2400 |
| TDH Maximum (Ft) | 80 |
| Outlet Connection Type | Barb |
| Outlet (In.) | 1 |
| Wetted Materials | PolyPro |
| Elastomers / O-ring | FKM |
| Motor Frequency | 60 |
| Max Operating Temperature (F) | 80 |
| Max Specific Gravity | 1.000000 |
| Max Particle Size (In) | .1 |
| Viscosity | SAE 30 oil 352.00 cp 2000.00 ssu |
| Shaft | FRP |
| Length (In.) | 60 |
| Mechanical Seal Type | Single |
| Coupling | Y |
| Other | NOTE: The PFP ships with a variable orifice. To vary flow, trim steps. Step 1 restricts flow to 10 gpm, Step 2 - 20 gpm, Step 3 - 30 gpm, Step 4 is the maximum opening |
| Approvals | CARB, ETL, SSPMA |
| Rotation | cw |
| Pump Bearing | Rulon |
| Low Oil Shutdown | Yes |
| Impeller Material | plastic |
| Duty | Continouos |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 9.000000 |
| Warranty (YRS.) | 1 |







