60-12C4-HYC
-
Model Number:
PCE2CL-HYC
-
Product Name:60-12C4-HYC
-
Manufacturer:
-
Series (23 Models):
Hydraulic Motor
Model Number
PCE2CL-HYC
$1,412.71
Pacer PCE2CL-HYC
PC Horizontal Pump
All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics provide resistance to many acids, bases, solvents, and salt water at temperatures as high as 200F (93C). "O"-rings and seals are FKM, EPDM or Buna N. Fasteners are stainless steel, with titanium or Hastelloy C internal fasteners, shaft seal and shaft adapter and Pacer's own Polymar non-metallic shaft seal for pumping highly corrosive liquids.
The 1 1/2" and 2" models are the same pump with both ports threaded 1 1/2" female and 2" male. The 3" pump has male threads only.
Pumps may be ordered with a chemical resistant Noryl bearing pedestal for long coupled direct drive or a cast iron pedestal for belt drive or heavy duty service. Close-coupled drives include electric, hydraulic or pneumatic motors and gasoline engines through 8HP.
- Non-metallic solution contact models available in all stock materials
- Flows to 230 U.S. GPM or 94 ft. TDH at 60 Hz (725 LPM or 20 M at 50Hz)
- Selection of drives-- Electric, Hydraulic or Pneumatic motors. Gasoline or Diesel Engines.
- Now available close-coupled to electric motors through 5HP
| Model Number | PCE2CL-HYC |
|---|---|
| Series | PC Plastic Corrosion Resistant Pump To 230gpm |
| Max Flow (GPM.) | 120 |
| Max Flow GPH | 7200 |
| TDH Maximum (Ft) | 70 |
| TDH Maximum (PSI) | 30 |
| Inlet Connection Type | FNPT |
| inlet size | 2" |
| Inlet (In.) | 2 |
| Outlet (In.) | 2 |
| Wetted Materials | SS-Plastic |
| Elastomers / O-ring | EPDM |
| Motor Frequency | 60 |
| Motor | Hydraulic Motor |
| Speed (RPM.) | 3450 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 200 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Mechanical Seal | No |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Motor Bearings | Ball |
| Impeller Number (In.) | C |
| Other | Picture does not show hydraulic motor which is close coupled. |
| Impeller Material | Polyester, semi-open |
| Duty | Continuous |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 12.000000 |
| Warranty (YRS.) | 1 |
| GPM Of Water At 20 Feet Of Head | 10 |
| GPM Of Water At 30 Feet Of Head | 80 |
| GPM Of Water At 40 Feet Of Head | 60 |
| GPM Of Water At 50 Feet Of Head | 40 |
Supporting Docs
Supporting Docs
You May Be Interested In
