My Cart

3" Self Priming Pedestal Mounted Pump

  • Model Number:

    BSP25ICU

  • Product Name:
    3" Self Priming Pedestal Mounted Pump
  • Manufacturer:
3"
Model Number
BSP25ICU
$2,887.00
Barmesa - BSP25ICU pump

Barmesa BSP25ICU

3" Self Priming Pedestal Mounted Pump 

Water pump frame mounted for PTO or long coupling drive. Solids / debris handling up to 1-1/4" with 3-vane semi-open cast iron impeller. Heavy duty Pedestal mounted pumps are widely used on mobile equipment where there is a PTO drive take off or in industrial applications where it is desired to have the motor set back from the pump. 

Moderate high pressure Pedestal pump are often used on water trucks for dust control, irrigation, hydro-seeding, fire fighting. Self priming means they can draft from local water source to fill the water tank. Pump can be powered by vehicle PTO, gas / diesel engine, electric motor.

PTO pumps can be operated at various speeds which in turn provide for a wide range of flow and pressure / head. The shaft HP 2-15 will also vary.  See performance curve under IMAGE tab for speed vs flow relationship. When considering a PTO pump consider the weight of the pump and keep in mind a robust heavy duty cast iron pump is going to last a long time.

 

More Information
Model Number BSP25ICU
part number 62040106
Max Flow (GPM.) 425
Max Flow GPH 25500
TDH Maximum (Ft) 180
TDH Maximum (PSI) 78
Inlet Connection Type FNPT
Inlet (In.) 3
Outlet Connection Type FNPT
Outlet (In.) 3
Wetted Materials Cast Iron
Elastomers / O-ring Buna-Nitrile
Motor PTO
Speed (RPM.) Variable
Self Priming Yes
Suction Lift (FT.) 20
Max Operating Temperature (F) 160
Max Particle Size (In) 1.25
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Shaft 416SS
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Impeller Size (IN.) 7
Rotation CCW facing drive side of pump
Impeller Material Cast Iron
Drain Yes
Country of Manufacture Mexico
Weight (Lbs) 236.000000
Warranty (YRS.) 1
>
Barmesa Pumps LLC started operations in 1953, manufacturing small self-primer pumps, jet pumps and end suction centrifugal pumps for the rural market.

During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.

Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.

Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".