3 chamber diaphragm pump
-
Manufacturer:
-
Series (9 Models):
-
Product Name:3 chamber diaphragm pump
-
Model Number:5853-7E10-J524
OPERATION: The 580 pumps can draw water from a holding tank and pressurizeit, or boost the pressure from a low pressure source. It is designed to operate intermittently, but most versions can run continuously for several hour intervals.It can be operated in demand mode controlled by an integral pressure switch,or in delivery mode controlled by an external power switching device. POWER: The power demand varies depending on flow and pressure from 50W to 200W. Motors are available in various configurations from 12 VDC to 230 VAC. 6 FTcord with plugs. MOUNTING: A steel mounting base with four hollow rubber grommets is standard and includedat no extra cost. The pump may be mounted in any position. FITTINGS: The standard pump head has a .375" port opening that is a "quick connect" JGcompression style , for use with 3/8" OD tubing.
Click here if you need a strainer for this pump
Model Number | 5853-7E10-J524 |
---|---|
Series | 580 Water pump Electric Diaphragm |
Max Flow (GPM.) | 2 |
Max Flow GPH | 120 |
TDH Maximum (Ft) | 139 |
TDH Maximum (PSI) | 60 |
inlet size | Less than 1" |
Inlet (In.) | 0.37 |
Outlet (In.) | 0.37 |
Wetted Materials | Nylon |
Elastomers / O-ring | EPDM |
Diaphragm | Santoprene |
Voltage (V) | 115 |
Voltage (Range) | 110-120 |
Phase (Ø) | Single (1) |
Motor Frequency | 60 |
Motor | TENV |
Self Priming | Yes |
Suction Lift (FT.) | 9 |
Max Operating Temperature (F) | 140 |
Viscosity | SAE 30 oil 352.00 cp 2000.00 ssu |
Length (In.) | 7.510000 |
Mechanical Seal | No |
Mechanical Seal Type | Double |
Other | includes 6 ft. cord and plug. Pressure switch is adjustable within certain range. Motor is a permanent magnet - brush type. If used at hign end of pressure range, use for time periods <40 minutes. See temperature performance curve. |
Drain | No |
Port Rotation | No |
Weight (Lbs) | 6.000000 |
Warranty (YRS.) | 1 |