17 Gal Rectangular 1/8 HP
-
Model Number:
17-FM68HA
-
Product Name:17 Gal Rectangular 1/8 HP
-
Manufacturer:
-
Series (6 Models):
Graymills 17-FM68HA
FM Series pumps are capable of pumping a wide range of viscosities. They are compact, yet they offer the performance and dependability of larger pumps. Graymills’ volute design enables FM Series pumps to pump down to an extremely low level. Discharge is above the integral mounting flange. These pumps will drop through a 4 ½ “ hole supported by their integral mounting flange.
FM series pumps are available with nickel-plated cast iron pump bodies. Aluminum pump body also available. Stainless steel bottom plates are included when special materials and coatings are ordered. Shafts also available in stainless steel.
Specifications: 1/8 HP, 3450 RPM, ½”NPT horizontal discharge. Maximum viscosity: 500 SSU.
Note: Information about the flow curves:1. FM70H water2. FM60H water3. FM70H 300 SSU oil4. FM60H 300 SSU oil
| Model Number | 17-FM68HA |
|---|---|
| Series | 17 Gal. Graymills Vertical Pump & Tank Sys. |
| Max Flow (GPM.) | 19 |
| Max Flow GPH | 1140 |
| TDH Maximum (Ft) | 22 |
| TDH Maximum (PSI) | 10 |
| TDH BEP (FT.) | 18.000000 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.1300 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 0.5 |
| Wetted Materials | 304SS, Acetal-Delrin, Cast Iron |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor | TENV |
| Speed (RPM.) | 3450 |
| Motor Frame | 48 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 160 |
| Shaft | Steel |
| Length (In.) | 8.500000 |
| Mechanical Seal | No |
| Mechanical Seal Type | Double |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 70.000000 |
