My Cart

12v Electric Fuel Transfer GTP10

Model Number
FP12 Graco 260000
graco_fp12 gtp12 fuel gas diesel pump

Graco FP12 Graco 260000

260000 is oblsolete but parts are still available

Graco fuel transfer pump GTP10 Blue Devil. CSA US mark applies only to 12 VDC motors for Class I, Div I, Group D Hazardous Locations. (CSA C/US listed motor). This model in manual, meaning no automatic nozzle. Graco’s positive displacement, self-priming gear pumps are designed for efficient gasoline, kerosene, and diesel fuel transfer. Flexible mounting options fit any tank design.


  • Manufacturer recognized and designed for leaded gasoline, diesel fuel, kerosene and fuel oil (FP260000). OPTIONAL flow meter available.
  • Ryton gears now for ethanol fuels
  • Positive displacement, self priming gear pump design
  • Built in relief valve and strainer
  • Specially designed motors for 30 minute duty cycle
  • Low current draw
  • High output flow
  • Ship complete with 12' hose, Leaded nozzle, suction pipe 34" and installation hardware
  • Built in sealed electrical connector
  • Coated die cast aluminum construction for light weight and corrosion resistance
  • Designed for versatile installation on all tank designs including "L" shaped tanks
  • Factory lubricated bearings never need servicing
  • Heavy duty 1 horsepower switch is enclosed for explosion protection
  • Pumping parts designed for easy servicing without breaking any electrical connections

10 psi (0.07 MPa, 0.7 bar) Maximum Working Pressure

External gear pumps. with the use of a suitable foot valve they can lift up to 20 feet. Bare pump only part # 260019. Repair kit is 260458. Gears 260277, Motor 260450 (blue 12v )

Other Manufactures Comparable Diesel Pumps: 23870-1200 (Jabsco), 50140-0000 (Jabsco)

The diesel (or even the older leaded gasoline) nozzle won't fit into a modern unleaded-gasoline car's filler

More Information
Model Number FP12 Graco 260000
Series Diesel Fuel Pumps Electric PBL
Max Flow (GPM.) 10
Max Flow GPH 600
TDH Maximum (Ft) 23
TDH Maximum (PSI) 10
Horse Power (HP) 1/4
Horsepower (IE .5, 1, 1.5, 20) 0.2500
Inlet Connection Type FNPT
inlet size 1"
Inlet (In.) 1
Outlet Connection Type FNPT
Outlet (In.) 0.75
Wetted Materials Aluminum
Voltage (V) 12DC
Voltage (Range) 12/24/36 VDC
Motor EXP (C 1, Gp D)
Speed (RPM.) 1725
Self Priming Yes
Suction Lift (FT.) 4
Viscosity Water 1.00 cp 31.00 ssu
Other Pump Construction:

  • Die cast aluminum pump body, cover and electrical housings
  • Molded glass filled thermoplastic gears
  • Stainless steel gear shafts
  • Recent UL requirements state that the pump must be hard wired and therefore these pumps have been de-listed due to cord being provided.
  • Built in on-off switch.
  • Kit comes complete with pump head, suction pipe, barrel adapter, DC units also have an 18 foot power cord with an in-line fuse.
  • 1 inch NPT inlet port and 3/4" NPT outlet port.
  • Blue powder coat finish

Designed for versatile installation on all tank designs including "L" Shaped tanks. Designed for easy servicing without disconnecting any electrical connections

All pump models should prime within 5 seconds after pump is turned on up to a height of 36 in. (91 mm). Pumps installed at height up to 5 ft. (1.52 m) may have difficulty priming. Follow procedure below to initiate prime. Pumps installed at suction height above 5 ft. (1.52 m) will have difficulty in holding prime. It is recommended that check valve (Graco part no. 260217) be added to the bottom of the suction tube to help maintain prime.

Approvals CSA, cUL
Impeller Material Ryton gears
Cord Length (Ft.) 18
Duty Intermitant
Drain No
Port Rotation No
Country of Manufacture United States
Weight (Lbs) 23.000000
Warranty (YRS.) 2

Supporting Docs

Supporting Docs
(Size: 1.91 MB) Extension: pdf