115v -.75HP Electric Oil Transfer 260102
-
Manufacturer:
-
Series (10 Models):
-
Product Name:115v -.75HP Electric Oil Transfer 260102
-
Model Number:OP115-1
Graco OP115-1
Obsolet see 25T822
Graco / PBL / APEX oil transfer pumps are designed specifically to transfer bulk oils and hydraulic fluids, antifreeze. Pump petroleum- and synthetic-based lubricants. Larger horsepower electric motors with a smaller displacement gear pump assure adequate power to pump viscous fluids at low temperatures. The pump kit mounts on a standard barrel and comes complete with pumping unit, hose, nozzle, bung adapter and suction pipe. Using a barrel dolly with the Graco Apex oil transfer pump gives an efficient, clean portable transfer system for servicing farm machinery and large equipment. The pump can also be used for transferring used oil. A Opt. suction pipe screen to filter out large contaminates must be used when pumping used oil. OPTIONAL flow meter available.
Model 260102 is intended for use with fluid viscosities of 1000 centistokes (5000 ssu) or less. For fluids with viscosities greater than 1000 centistokes use pump model 260101.)
Features:
- Electric motor driven metal gear type pump
- Self priming, positive displacement design
- Mounts directly on barrel with adapter supplied
- 12 volt DC and 115 AC models
- Pumps high viscosity fluids at 8 gallons per minute
- Built in 50psi bypass valve and on-off switch
- AC model has built in 30 inch three prong power cord
- 3/4 horsepower motors supply the necessary power to pump viscous fluids
- Kit comes complete with suction pipe, 8 foot hose, nozzle and bung adapter
Key Applications
- Servicing farm machinery
- Transfer bulk oil
- Transfer used oil
Key Materials
- Synthetic Oil
- Petroleum Based Oils
- Hydraulic Fluids
- Used Oil
CAUTION: Do not pump flammable fluids.
| Model Number | OP115-1 |
|---|---|
| Series | Oil Pumps Electric PBL |
| Max Flow (GPM.) | 8 |
| Max Flow GPH | 480 |
| TDH Maximum (Ft) | 70 |
| TDH Maximum (PSI) | 30 |
| Horse Power (HP) | 3/4 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.7500 |
| Inlet Connection Type | FNPT |
| inlet size | 1" |
| Inlet (In.) | 1 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 0.75 |
| Wetted Materials | Cast Iron |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | TENV |
| Speed (RPM.) | 1725 |
| Self Priming | Yes |
| Suction Lift (FT.) | 3 |
| Max Operating Temperature (F) | 140 |
| Viscosity | Glycerine 880.00 cp 5000.00 ssu |
| Mechanical Seal | Lip seal |
| Mechanical Seal Type | Single |
| Other | Power cord: 30 inch 3 prong Hose size: 8 foot, 3/4 diameter. If used oil or other dirty liquid use suction screen 260306. Repair kit 260293.The motors are drip proof rated at 3/4 hp. The motors have sealed bearings and require minimal maintenance. All models come with hose, nozzle, 34 in. (864 mm) suction tube assembly, and bung adapter |
| Cord Length (Ft.) | 30 in. |
| Drain | No |
| Port Rotation | No |
| Country of Manufacture | United States |
| Weight (Lbs) | 27.000000 |
| Warranty (YRS.) | 2 |
