1.5HP Cast Iron Sprinkler Pump
-
Manufacturer:
-
Series (8 Models):
-
Product Name:1.5HP Cast Iron Sprinkler Pump
-
Model Number:FP5242
Flotec FP5242
Cast iron sprinkler pumps are built tough for even the most
demanding sprinkler jobs. Heavy-duty A.O. Smith motors deliver
suction lift to 25' which is 5' higher than the ordinary plastic
models. Strong enough to manage large sprinkler zones with ease. 1
YEAR WARRANTYFeatures
- Superior performance at depths to water of 25' or less
- Ideal for larger sprinkler zones or water transfer
- Rugged, cast iron pump housing
- Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
- Heavy-duty A.O. Smith motor
- Ready-to-install 230 volt motor-see manual for 115 volt conversion
- Fully serviceable unit
- TC2104 pressure gauge recommended
| Model Number | FP5242 |
|---|---|
| Series | Sprinkler Pumps |
| Max Flow (GPM.) | 55 |
| Max Flow GPH | 3300 |
| TDH Maximum (Ft) | 92 |
| TDH Maximum (PSI) | 40 |
| Horse Power (HP) | 1 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 1.5000 |
| Inlet Connection Type | FNPT |
| inlet size | 2" |
| Inlet (In.) | 2 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1.5 |
| Wetted Materials | Cast Iron |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115/230 |
| Voltage (Range) | 110-120/220-240 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | ODP |
| Speed (RPM.) | 3450 |
| Motor Frame | 56J thrd |
| Self Priming | Yes |
| Suction Lift (FT.) | 20 |
| Max Operating Temperature (F) | 120 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | 416SS |
| Mechanical Seal | No |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Other | Includes drain plug. 1 Warrenty. Check valve or foot valve recommended. Unit is factory set for 230v. |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 73.000000 |
| Warranty (YRS.) | 1 |
Supporting Docs
Supporting Docs
You May Be Interested In
