1/2 HP Self priming centrifugal pump
-
Model Number:
DPCMS1
-
Product Name:1/2 HP Self priming centrifugal pump
-
Manufacturer:
115v
Model Number
DPCMS1
Sta-Rite DPCMS1
Features
- 1/2hp
- Single-Phase, 115-volt, 60hz
- handle and power cord assembled
- built in flapper style check-valve
- Rugged one-piece, close-grain cast iron pump body
- rapid "single-body-fill" priming
- Powered by 56C motor, thermal overload protected
- handles .225" diameter solids
- 1-1/4 NPT threaded connections
- UL, CSA Listed
- Dual voltage, 115/230, 1Ph
- applications
- water transfer, effluent and waste water removal and grey water dewatering
- Materials of Construction
- Body - cast iron
- Base - steel
- Seal-plate - cast iron
- Impeller - polycarbonate
- Diffuser - fiberglass-reinforced polypropylene with brass wear-ring
- Shaft - stainless steel
| Model Number | DPCMS1 |
|---|---|
| Max Flow (GPM.) | 44 |
| Max Flow GPH | 2640 |
| TDH Maximum (Ft) | 63 |
| TDH Maximum (PSI) | 27 |
| Horse Power (HP) | 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.5000 |
| Inlet Connection Type | FNPT |
| inlet size | 1 ¼" |
| Inlet (In.) | 1.25 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1.25 |
| Wetted Materials | Acetal-Delrin, CI-SS |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115/230 |
| Voltage (Range) | 110-120/220-240 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | ODP |
| Speed (RPM.) | 3450 |
| Motor Frame | 56C |
| Self Priming | Yes |
| Suction Lift (FT.) | 20 |
| Max Operating Temperature (F) | 140 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | 316SS |
| Mechanical Seal | No |
| Mechanical Seal Type | Single |
| Other | A.O. Smith square flange 48J motor. UL / CSA listed. |
| Duty | Continuous |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 40.000000 |
| Warranty (YRS.) | 1 |
>
