My Cart

Vertical Pumps

Designed and meant to be used as a vertically mounted assembly. Typical vertical pumps include or have as an option some sort of mounting plate. Others are meant to be completely submersed in the liquid. Vertical pumps can have either a relatively short shaft and therefore be canti-levered from the motor allowing for them to operate without bearings and to run-dry. Others have some sort of bearings or bushings, usually a non-metallic type, somewhere along the shaft to minimize shaft run-out and whip. This category also includes those pumps, which are hermetically sealed pump and motor units, suitable for being completely submersed in the liquid. Unlike horizontals, vertical pumps rarely need to be primed, the impeller and casing simply need to be submerged during start-up. Here considerations are usually on the controlling of the pump on-off cycles with some sort of float switch.
View as List Grid

Items 1-10 of 91

Set Descending Direction
per page
Page
  1. Barmesa Pumps

    Submersible .75hp Sewage Pump

    2BSE74SS

    $1,324.92

    Submersible NON-CLOG pump 3/4hp (0.75hp), 2" spherical solids handling. 15 ft. cord. All cast iron. Heavy duty sewage Non-clog water pump. Three phase industrial motor, NEMA B, oil filled, with upper and lower ball bearings. Impeller Design: open,...

    460v 3/4HP Learn More
  2. Barmesa Pumps

    Submersible Non Clog Sewage Pump

    2BSE51SS

    $1,754.46

    Submersible NON-CLOG pump 120v, 2" spherical solids handling. 15 ft. cord. All cast iron. Heavy duty sewage Non-clog water pump. Single phase industrial motor, NEMA B, oil filled, with upper and lower ball bearings. Impeller Design: open, double v...

    115v 1/2HP Learn More
  3. AMT Pumps

    MSV3 3 HP 19 stage pump

    MSV3-19-1P

    $1,928.00

    3HP Multistage Vertical booster pump, 19 stages. Commercial / industrial centrifugal pumps, (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations includ...

    3HP 230v Learn More
  4. AMT Pumps

    MSV3 3 HP 19 stage pump

    MSV3-19-3P

    $1,928.00

    3HP Multistage Vertical booster pump, 5 stages. Commercial / industrial centrifugal pumps, (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include...

    3HP 230/460v Learn More
  5. Barmesa Pumps

    High pressure septic pump Automatic

    BPSTEP512A

    $1,747.00

    Automatic STEP Submersible High Head Effluent, septic tank pump.

    S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent solids applications for the long t...

    1/2HP 115v 2" High Head, Automatic Learn More
  6. AMT Pumps

    MSV1 2HP 15 stage pump

    MSV1-15-3P

    $1,647.00

    Multistage Vertical booster pump. Commercial / industrial centrifugalpumps are non-self-priming (gravity feed)units designed to handle high-pressure lowflow liquid transfer applications where nosuction lift is required. Typical installations inclu...

    2hp, 208-230V/460v Learn More
  7. Power-Flo Pumps

    High Temperature Sump pump

    PFS411HT

    $1,499.23

    High Temperature Sump / sewage pump 200F . Submersible non-clog sewage pumps are designed for high liquid temperature to 200 degrees, heavy duty applications with some solids.

    High temp sump pumps feature:

    • Maximum flow rate to 92 gpm
    • A shut-o...
    High Temperature Sewage pump Learn More
  8. Barnes Pumps

    Sump Pump-096752

    SE511

    $1,427.38
    Submersible NON-CLOG pump, 2" spherical solids handling. In-board oil filled mechanical seal with exclusionary shaft seal as secondary. Does not include float switch. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Heaviest duty pump o...
    096752 1/2HP, 115v 1750rpm Learn More
  9. Barnes Pumps

    Fountain Pond pump .4 hp CI

    SF411

    $1,306.00
    Great shallow water pond fountain pump which provides high flow up to 115 GPM. Nylon 2 vane impeller with back pump out vanes. Single SCi mechanical seal, oil-filled reservoir, secondary exclusion seal. Ball bearings upper and lower end of moto...
  10. Graymills Pumps

    Vertical CI Centrifugal Pump & Mtr

    TN33HE 1-1/2

    $1,313.84
    Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast ir...
View as List Grid

Items 1-10 of 91

Set Descending Direction
per page
Page