Positive Displacement Pumps
These pumps are often thought of as high-pressure pumps. Their
positive displacement of fluid and fixed volume are the result of
the fluid being mechanically moved through their pump passage on a
regular cycle. This means that regardless of the system they
discharge into, the pressure and volume will remain constant. The
power of the driving device and its speed, limit the volume and
pressure.Positive Displacement pumps:Flow rates of GPD, CC/min to
100 GPM typically.Discharge pressures of a 1 to 1000 PSI.Low speed
and fixed volume per cycle, they handle very viscid fluids
well.Smaller than centrifugal pumps.Quiet, do not ad much heat to
the fluid, suitable for shear sensitive fluids.Diaphragm pumps can
easily pass solids, stringy and fibrous foreign matter. Are made in
materials from CI to Titanium and PP, PVDF and PPS engineering
resins.
-
Hypro Pumps
Cast Iron Gear pump 1/4"
GMCV2VA3
$1,230.00Rotary Cast Iron Gear pump end. 303 SS fasteners, steel gears.
Adjustable relief valve designed for internal pressure relief, can be ported for either internal or external discharge. Do not operate the relief valve for more than one minute.
Hypr...
3/4HP 115/230v ODP 1/4" Learn More -
Oberdorfer Pumps
Chemical Gear pump PEO
S2101BCJ-C1
$3,021.88Highly Engineered Chemical Helical Gear pump designed to handle highly corrosive liquids that must be pumped under pressure. Pump End Only with close coupled mtr adapter. Its rugged, three-section, thru-bolt construction provides ease of servicin... -
Hypro Pumps
Cast Iron Gear pump PEO
GMCV3VA
$899.00Rotary Cast Iron Gear pump end. 303 SS fasteners, steel gears.
Adjustable relief valve designed for internal pressure relief, can be ported for either internal or external discharge. Do not operate the relief valve for more than one minute.
Use ...
No motor 3/8" Learn More -
General Pump
Triplex Plunger 4.7hp
TC1809E175
$898.78TC Series 60, Triplex plunger pump, hollow shaft, flanged for direct couple to electric motors (NEMA-56C). Forged brass manifold with an exclusive lifetime warranty. Ideal for all general cleaning and misting applications.- Die cast, anodized...
-
General Pump
Triplex Plunger High Flow
TSF2019
$3,242.71Triplex Plunger Pump, High Flow - Forged brass manifold with an exclusive lifetime warranty. Innovative seal design to extend seal life. New valve cap design improves hydrostatic performance.- Max. Inlet Pressure: 125 PSI
- Min. Inlet Vacuum: 9 ft....
-
Hypro Pumps
Cast Iron Gear pump only
MCN3A
$5,071.99Rotary Cast Iron Gear pump end. 303 SS fastners, Ryton gears.Adjustable relief valve designed for internal pressure relief, can be ported for either internal or external discharge. Do not operate the relief valve for more than one minute.
Use...
-
General Pump
Triplex Plunger High Flow
TSF2021
$3,301.65Triplex Plunger Pump, High Flow - Forged brass manifold with an exclusive lifetime warranty. Innovative seal design to extend seal life. New valve cap design improves hydrostatic performance.- Max. Inlet Pressure: 125 PSI
- Min. Inlet Vacuum: 9 ft....
8GPM 3600PSI Learn More -
General Pump
Triplex Plunger High Flow
TSF2219
$3,892.79Triplex Plunger Pump, High Flow - Forged brass manifold with an exclusive lifetime warranty. Innovative seal design to extend seal life. New valve cap design improves hydrostatic performance.- Max. Inlet Pressure: 125 PSI
- Min. Inlet Vacuum: 9 ft....
-
Hypro Pumps
CI gear pump 11 gpm
C4V
$1,493.6911 GPM Cast iron pedestal mounted gear pump. For oils and other lubricating liquids. Not for use on water. Vellumoid Gasket Material, FKM Lip Seal -
General Pump
Triplex Plunger High Flow
TSF2221
$3,892.79Triplex Plunger Pump, High Flow - Forged brass manifold with an exclusive lifetime warranty. Innovative seal design to extend seal life. New valve cap design improves hydrostatic performance.- Max. Inlet Pressure: 125 PSI
- Min. Inlet Vacuum: 9 ft....
