Positive Displacement Pumps
These pumps are often thought of as high-pressure pumps. Their
positive displacement of fluid and fixed volume are the result of
the fluid being mechanically moved through their pump passage on a
regular cycle. This means that regardless of the system they
discharge into, the pressure and volume will remain constant. The
power of the driving device and its speed, limit the volume and
pressure.Positive Displacement pumps:Flow rates of GPD, CC/min to
100 GPM typically.Discharge pressures of a 1 to 1000 PSI.Low speed
and fixed volume per cycle, they handle very viscid fluids
well.Smaller than centrifugal pumps.Quiet, do not ad much heat to
the fluid, suitable for shear sensitive fluids.Diaphragm pumps can
easily pass solids, stringy and fibrous foreign matter. Are made in
materials from CI to Titanium and PP, PVDF and PPS engineering
resins.
-
General Pump
KLZ Triplex Plunger 23.7hp
KLZ40
$22,126.06KLZ Triplex Plunger Pump is a heavy-duty industrial pump with a Duplex SS (ASTM A890) Manifold; with 316 SS Wetted Parts including valve plate and seat for desalination and other corrosive applications.- Three horizontal plungers
- Vertically-arran...
-
Tsurumi
Diaphragm Trash pump
TD4-300
$2,175.00Diaphragm mud trash pumps. Capable of continuous dry operation for seepage dewatering. Handles sand, mud, and sludge.- Heavy-duty Honda gasoline engine with oil sensor delivers high power from a compact, reliable design.
- Two-ply neoprene diap...
Honda 4 HP GX120 Learn More -
General Pump
KLZ Triplex Plunger 24.0hp
KLZ45
$22,126.06KLZ Triplex Plunger Pump is a heavy-duty industrial pump with a Duplex SS (ASTM A890) Manifold; with 316 SS Wetted Parts including valve plate and seat for desalination and other corrosive applications.- Three horizontal plungers
- Vertically-arran...
-
General Pump
KLZ Triplex Plunger 29.5hp
KLZ50
$22,126.06KLZ Triplex Plunger Pump is a heavy-duty industrial pump with a Duplex SS (ASTM A890) Manifold; with 316 SS Wetted Parts including valve plate and seat for desalination and other corrosive applications.- Three horizontal plungers
- Vertically-arran...
-
General Pump
LH 3Plex Plunger 135.5hp
LH4015
$43,466.72A heavy-duty industrial pump with a nickel-treated, spheroidal cast iron manifold and internal gearbox.- Max. Inlet Pressure: 45 PSI
- Max. Fluid Temp.: 140ï½° F
- Inlet Port Thread: 80 mm BSP-F
- Discharge Port Thread: 36 mm BSP-F
- Shaft Diameter: 1.96...
-
General Pump
LH 3Plex Plunger 135.9hp
LH5515
$43,466.72A heavy-duty industrial pump with a nickel-treated, spheroidal cast iron manifold and internal gearbox.- Max. Inlet Pressure: 45 PSI
- Max. Fluid Temp.: 140ï½° F
- Inlet Port Thread: 80 mm BSP-F
- Discharge Port Thread: 36 mm BSP-F
- Shaft Diameter: 1.96...
-
General Pump
LH 3Plex Plunger 138.4hp
LH4515
$43,466.72A heavy-duty industrial pump with a nickel-treated, spheroidal cast iron manifold and internal gearbox.- Max. Inlet Pressure: 45 PSI
- Max. Fluid Temp.: 140ï½° F
- Inlet Port Thread: 80 mm BSP-F
- Discharge Port Thread: 36 mm BSP-F
- Shaft Diameter: 1.96...
-
General Pump
LH 3Plex Plunger 141.5hp
LH5015
$43,466.72A heavy-duty industrial pump with a nickel-treated, spheroidal cast iron manifold and internal gearbox.- Max. Inlet Pressure: 45 PSI
- Max. Fluid Temp.: 140ï½° F
- Inlet Port Thread: 80 mm BSP-F
- Discharge Port Thread: 36 mm BSP-F
- Shaft Diameter: 1.96...
-
All-Flo Pumps
PP Air Operated Double Diaphragm Pump
C100-NPP-SSPE-G70
$2,034.00PolyPro AODD Pump 1".
Lube-free air valve, Non-stalling, No vent holes for corrosive fumes to get into, All plastic air system are corrosion resistant. Replaces BK-10E. Non-electrical. Models available in PP, PVDF, Nylon, Conductive Nylon, Al and...
BK-10E Learn More -
General Pump
LH 3Plex Plunger 143.5hp
LH6015
$46,153.07A heavy-duty industrial pump with a nickel-treated, spheroidal cast iron manifold and internal gearbox.- Max. Inlet Pressure: 45 PSI
- Max. Fluid Temp.: 140ï½° F
- Inlet Port Thread: 80 mm BSP-F
- Discharge Port Thread: 36 mm BSP-F
- Shaft Diameter: 1.96...
