My Cart

Rotary Pumps - Gear, Flexible Impeller, Screw

These pumps have a set of rotating gears, flexible impellers, screw rotor or vanes connected to a driven shaft. Therefore most of these pumps incorporate a mechanical seal, packing or lip seal along the shaft at its back end in order to keep the fluid from leaking along the shaft. There are a few models, which are magnetically coupled and thus seal-less. Another type which is seal-less is the Peristaltic which uses a rotating roller assembly to compress a hose over a given arc length. These pumps are very reliable in pumping medium to thick liquids which typically are not handled by Centrifugal pumps and in applications where medium to high discharge pressures are needed at low flow rates. Varying the motor speed easily controls their output. Most units include some sort of built in relief valve, but those that do not must have one installed into the piping to prevent a dangerous over pressure condition. Not recommended for liquids with fine abrasives or thin non-lubricating liquids like water that will accelerate pump wear.Typical Positive Displacement Rotary pumps include helical gear, spur gear, lobe, progressive cavity, peristaltic, flexible impeller and sliding vane to name a few.
View as List Grid

Items 31-40 of 83

Set Descending Direction
per page
  1. Oberdorfer Pumps

    3/4" Bronze gear pump 1HP

    N970RH-N26

    $1,583.00
    3/4" Bronze rotary gear pump with relief valve and close coupled to a 1 HP 115v/1/60 1725 RPM TEFC motor.Pump housings and gears are made of top quality bronze, shafts are stainless steel 303. Bearings are made of high performance carbon-graphite...
    115/230v ODP Relief Valve Learn More
  2. Oberdorfer Pumps

    Bronze gear pump Pedestal

    N3000RS15

    $1,044.00
    Bronze rotary gear pump with relief valve. Pedestal mounted bronze gear pump.

    See performance chart for HP required VS. motor RPM and pump performance.

  3. Oberdorfer Pumps

    1.25" Bronze gear pump

    N1100W-T98

    $2,159.00
    1 1/4" Bronze rotary gear pump with relief valve and close coupled to a 1 1/2 HP TEFC motor.

    Use to pump oil and other viscous thick liquids, De-icing fluids.

    1.5HP 230/460v Learn More
  4. Oberdorfer Pumps

    Gear Fuel pump

    N1000S3

    $375.00
    1/4" Bronze rotary gear pump without relief valve. Used on simplex diesel fuel day tank. Replaces 1000B-28 and 1000B-19 Simplex diesel fuel sytems.
  5. Hypro Pumps

    Cast Iron Motor Mounted Gear Pump

    GCCV22V

    $923.45
    Cast Iron Gear pump close coupled to a 1/2 hp Carbonator type motor. Steel spur gears with steel shaft and CI shaft supports. Standard pressure relief valves that can be ported internally or externallyand adjusted.

    Shertech self-priming, positive...

    115v CI Learn More
  6. Oberdorfer Pumps

    10 GPM CI GEAR PUMP & PED

    10GB1111S

    $1,013.00
    Medium duty CI gear pump with relief valve and pedistal for long coupling. Mechanical sealed, bronze bearings. CW rotation.

    b>Features:

    1. Shafts: Ground and polished steel.
    2. Helical Gears: For quiet running.
    3. Housing: Of close grain cast iron. Three...
  7. Hypro Pumps

    Hot Oil Gear Pump

    NG7V

    $2,168.60

    NG NSF Listed Industrial Gear Pumps. OBSOLET

    Gear pumps are recommended for non-abrasive, non-flammable liquids compatible with pump component materials. They can be used for liquid circulation, lubrication, pressure boosting, filtering, medium p...

  8. Oberdorfer Pumps

    18 GPM CI GEAR PUMP & PED

    18GB1111S

    $1,226.00
    Medium duty CI gear pump with relief valve and pedistal for long coupling. Mechanical sealed, bronze bearings. CW rotation.

    b>Features:

    1. Shafts: Ground and polished steel.
    2. Helical Gears: For quiet running.
    3. Housing: Of close grain cast iron. Three...
  9. Oberdorfer Pumps

    Bronze Rotary Gear Pump EXP

    N999-spec

    $1,200.00
    1/2 gpm diesel oil pump with EXP motor.

    Features N999 Series:

    • Compact design eases installation and use in limited space areas.
    • Construction is bronze and stainless steel wetted components.
    • Close tolerance design allows for consistent perf...
  10. Hypro Pumps

    Hot Oil Gear Pump Relief Valve

    NG11V

    $2,600.00

    NG NSF Listed Industrial Gear Pumps. Obsolete

    Gear pumps are recommended for non-abrasive, non-flammable liquids compatible with pump component materials. They can be used for liquid circulation, lubrication, pressure boosting, filtering, medium ...

View as List Grid

Items 31-40 of 83

Set Descending Direction
per page