Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Munro Pumps
Submersible Fountain Pump
RP0405T22A
$3,551.00Submersible Fountain Pump 5HP.
This amphibious 4" pump designed for continuous duty water features does not need a vault. The pump can be positioned at the bank instead of the bottom of a water source because a hose and strainer allows remote int...
5HP Learn More -
EBARA Pumps
Stainless Vertical Booster pump
EVMSU1-8F0100D3S
$1,977.14EVMSU1-8F0100D3S Stainless Steel Vertical Booster pump. With initial hydraulic coverage to 100 GPM and 800 feet TDH, the EBARA Model EVMSU is designed for booster, water purification, and hot water applications.State-of-the-art formed stainle...
1HP 230/460 220/380V ODP Learn More