Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Myers Pumps
Explosion Proof Sump Pump
SX50H-01 208V
$4,347.00Myers SX50h is a rugged 1/2HP Explosion Proof Submersible sump pump high head designed for many commercial, municipal or industrial applications. The SX50 is CSA listed with construction for use in Class 1, Division 1, Group D hazardous locations....
208v/1 1/2HP Learn More -
Barnes Pumps
3SEV submersible trash pump
3SEV524DS
$2,251.00Submersible trash pump. Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 6.3 -
Barnes Pumps
3SEV Vortex, Double Seal
3SEV594DS
$2,634.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 3.7/3.8 -
Little Giant Pumps
14S-CIM sewage pump
514321
$1,568.51Submersible Sewage Ejector Pump 208-230V, Manual, 20' Power Cord. Little Giant submersible sewage pump.Professional series pond fountain pump. Sewage ejector pump made in USA.
1/2 HP 208/240V Learn More -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNRT46E 1/2
$1,855.46Agitator pumps are designed for use with liquids containing solids which must be kept in suspension or require constant circulation to maintain uniform viscosity. A port in the pump volute bypasses a jet stream of fluid to “stir” tank conten... -
Myers Pumps
Light comm. sewage
MW50-11
$1,134.00This pump provides big performance in a small package. The enclosed two-vane impeller provides the flow and head required for residential and light commercial seage applications, and passes a full 2" diameter solid. This pump is constructed of on... -
Graymills Pumps
Cast Iron Coolant Pump & Mtr
IMS50F 1/2
$821.40Cast Iron Coolant Pump & Mtr
Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications r...
1/2HP 230/460v Learn More -
Tsurumi
1/2 hp submersible Titanium Pump
50TM2.4S
$1,452.00Sea water pump. Saltwater pumps submersible Semi vortex.
The all wetted parts are made of titanium, Far stronger than stainless steel, titanium will never rust in sea water or under similar conditions. there is both Manual and Automatic versions ...
115 or 230v Learn More -
Graymills Pumps
Coolant Pump Vertical
IMV50E 1/2
$812.41Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast ir...1/2HP 115/230v Learn More -
Barnes Pumps
Effluent Pump Step-DS 120v
STEP512DS
$2,258.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle...