Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TN41F 1/2
$1,262.23Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron... -
Graymills Pumps
Suction Coolant Pump & Mtr
IMS50E 1/2
$816.91Graymills Coolant pumps
are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical c...
1/2hp 115/230v Learn More -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TN43F 1/2
$1,274.06Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron... -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNRT436E 1/2
$3,108.23Agitator pumps are designed for use with liquids containing solids which must be kept in suspension or require constant circulation to maintain uniform viscosity. A port in the pump volute bypasses a jet stream of fluid to “stir” tank conten... -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNRSS33HF 1/2
$2,322.00Agitator pumps are designed for use with liquids containing solids which must be kept in suspension or require constant circulation to maintain uniform viscosity. A port in the pump volute bypasses a jet stream of fluid to “stir” tank conten... -
Barnes Pumps
Non-clog pump w/ dbl seal .5hp
3SEV512DS
$2,505.00Barnes sewage Submersible NON-CLOG vortex Pump, handles 2" spherical solids, Vortex recessed impeller, double seal. Designed for raw sewage, dewatering and wet mud applications. All cast iron construction. 15 ft. cord and plug. -
Barnes Pumps
Subm. High Temp. Sewage Pump
SE51HT
$2,041.56Barnes Manual Submersible non-clog sewage ejector high temperature pump is designed for high temperature raw sewage applications.104876#- Handles 2" spherical solids
- Includes 15' Cord w/ plug
- No Float
1/2HP 115V Learn More -
Barnes Pumps
Non-clog pump, Sgl seal
3SE524L
$1,763.36Submersible non-clog sewage pump designed for typical raw sewage applications. -
Barnes Pumps
Effluent Pump 115v
EH512L
$1,899.72Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor housing is oil...1/2HP Learn More -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNRT336E 1/2
$1,505.19Agitator pumps are designed for use with liquids containing solids which must be kept in suspension or require constant circulation to maintain uniform viscosity. A port in the pump volute bypasses a jet stream of fluid to “stir” tank conten...