Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
DSW315HF 1/2
$1,734.55Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron... -
Tsurumi
Automatic 1/2 hp
50TMA2.4S
$1,696.00Saltwater Titanium (better than stainless steel) pumps submersible Semi vortex. Automatic operation with integral level float switch
The all wetted parts are made of titanium, Far stronger than stainless steel, titanium will never rust in sea wat...
230v/1 or 115v Learn More -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
DSW312HF 1/2
$1,706.75Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron... -
Barnes Pumps
Sewage Pump
3SE514DS
$2,423.55Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 11.6 -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNRSS31F 1/2
$2,604.28Agitator pumps are designed for use with liquids containing solids which must be kept in suspension or require constant circulation to maintain uniform viscosity. A port in the pump volute bypasses a jet stream of fluid to “stir” tank conten... -
Tsurumi
Tsurumi Submersible Pump
HS2.4S-62
$335.00Tsurumi Submersible Sand Trash Pump. Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used to dewater floodi...
3 180GPH 1/2HP 115v Learn More -
Barmesa Pumps
1/2HP Submersible Dewatering pump
2AHS051
20% Off Special Price $367.20 Regular Price $459.00Submersible Sand Trash Dewatering Pump Manual Submersible Dewatering Pump. Handles algae and other debris up to 3/8″ x 1″ in size.
- BEARINGS - Ball, single row, permanently oil lubricated for 60,000 hours of work. Designed for radial and axial l...
3,180GPH 1/2HP 115v Learn More -
Barmesa Pumps
Automatic submersible dewatering pump
2AHS051A
20% Off Special Price $392.00 Regular Price $490.00Automatic Submersible Dewatering trash Pump.- BEARINGS - Ball, single row, permanently oil lubricated for 60,000 hours of work. Designed for radial and axial loads.
- CORD ENTRY - 15 ft of neoprene cord, sealed against moisture.
- SEAL Design: ...
3,180GPH 1/2HP 115v Learn More -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNRT46F 1/2
$1,834.95Agitator pumps are designed for use with liquids containing solids which must be kept in suspension or require constant circulation to maintain uniform viscosity. A port in the pump volute bypasses a jet stream of fluid to “stir” tank conten... -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNRSS37F 1/2
$2,731.51Agitator pumps are designed for use with liquids containing solids which must be kept in suspension or require constant circulation to maintain uniform viscosity. A port in the pump volute bypasses a jet stream of fluid to “stir” tank conten...