Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
AMT Pumps
MSV3 3 HP 19 stage pump
MSV3-19-1P
$1,928.003HP Multistage Vertical booster pump, 19 stages. Commercial / industrial centrifugal pumps, (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations includ...
3HP 230v Learn More -
AMT Pumps
Vertical Sealless Sprayer Washer Pump
4445-95
$1,200.00AMT Vertical Sealless Sprayer Washer pumps are designed for OEM, automotive and industrial washing machines, parts cleaners, spray booths and cooling towers. “No bottom bearing” design and 316 Stainless Steel impeller resists errosion from abr...3 HP 230V /1 Learn More