Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barnes Pumps
Submersible Non-Clog Sewage Pump
SE52
$1,533.31Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Bolt on threaded discharge flange. NO FLOAT switch 104874- Handles 2" spherical solids
- Includes 15' Cord w/o plug
- Pump may NOT be operated DRY f...
230v/1 1/2HP Learn More -
Barnes Pumps
Submersible Non-Clog Sewage Pump w/ switch
SE52AU
$1,766.57Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Discharge has bolt on threaded flange. Replaces SE52A- Handles 2" spherical solids
- Includes 15' Cord and plug
- Includes Piggy back plug mechanica...
230v/1 1/2HP Learn More -
Sta-Rite
STEP PLUS Filtered Effluent Pump
20DOM05221+1-01
Sta-Rite High-Head Filtered Effluent Pump. ST.E.P. Plus™. Septic high head pump
- Superior draw-down capability to 4-1/2" vs. 13-1/2" on a standard NEMA 4"
- 25% Reduced AMP-draw
- Cooler and quieter operation - eliminates expensive "flow-inducer slee...
1/2HP 230v/1 Learn More