Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Myers Pumps
Simplex Explosion Proof Sump Pump
SX50-21
$4,347.00Myers SX50 is a rugged 1/2HP Explosion Proof Submersible sump pumps designed for many commercial, municipal or industrial applications. The SX50 is CSA listed with construction for use in Class 1, Division 1, Group D hazardous locations. These pum...
230v/1 1/2HP Learn More -
Munro Pumps
Puddle Pro Pump 1/2HP
FSR4001S22
$776.25FSR Dewatering Pump is especially designed for continuous duty with stable operating performance to carry dirty or clean water. Motor has ball bearings top & bottom. The FSR400 requires no priming, suction hose or foot valve. Simply submerge the ...230v Learn More -
Barnes Pumps
Effluent Pump Step-DS 240v
STEP522DS
$2,307.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle... -
Barnes Pumps
Non-clog pump, Sgl seal
3SE524L
$1,763.36Submersible non-clog sewage pump designed for typical raw sewage applications. -
Barnes Pumps
105059 Effluent pump
EH522L
$1,953.72Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane Effluent pump CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor ho...1/2Hp Manual 230v/1 Learn More -
Barnes Pumps
PFSTEP522 Effluent pump
PFSTEP522
$1,224.84Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane Effluent pump CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor hous... -
Barnes Pumps
Vortex Pump .5hp
2SEV522L
$2,165.68Barnes 2SEV submersible NON-CLOG pump, handles 2" spherical solids due to its unique vortex impeller design. All cast iron heavy duty design. Includes 15ft line cord.1/2HP ,230v Learn More -
Barnes Pumps
Effluent Pump man 240v
EH522HT
$2,357.64High Temperature Submersible effluent pump
designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor h...
High Temp 1/2HP 230v/1 Learn More -
Barnes Pumps
Effluent Pump Step-SS-240v
STEP522SS
$1,911.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle... -
Barnes Pumps
Sump Pump
SE521
$1,511.91Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 6.2 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump.096755 Learn More