Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barmesa Pumps
Grinder Pump 5HP
BGPH502DS
$5,652.00Grinder Pump by Barmesa. Rugged and reliable grinder cutter pumps provide continuous, maintenance-free submersible operation while effectively handling objects sewage. Capacitor and start relay are required separately. Therefore use a control ...
5HP 230v/1 double seal Learn More -
Power-Flo Pumps
Grinder Pump
PFG5022
$8,149.18Grinder Pump. Designed to reduce domestic, commercial, institutional and light industrial sewageto a finely ground slurry.PFG grinder pumps feature:
- Permanent split capacitor oil filled motor for reliable, high performance, longer motor l...
5HP 230v/1 High volume Learn More -
Barnes Pumps
SGV-2" Discharge
SGV5022L
$10,007.14Rugged and reliable SGV Series pumps provide continuous, maintenance-free operation while effectively handling objects such as plastic, rubber, disposable diapers, towels and clothing.
3, 5 and 7 1/2 HP SGV Series Designed for schools, lift ...
5hp/240v/1ph,3450rpm Learn More -
Barnes Pumps
Submersible Sewage Sump Pump 133149
4SE5024L
$7,442.00Barnes 4" Horizontal Discharge Solids Handling Pump 4" horizontal discharge handles up to 3" spherical solids. Motor sizes from .9 to 100HP Open and enclosed impellers, some with pump-out vanes on backside. Delta impellers available on some mod...230v/1 5HP 4" Learn More