Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barnes Pumps
3SE sewage pump
3SEV724L
$2,092.00High Flow sewage pump. Submersible non-clog sewage pump designed for typical raw sewage applications. -
Barnes Pumps
3SE Vortex, Single Seal
3SEV524L
$1,529.00Submersible non-clog sewage pump designed for typical raw sewage applications. -
Myers Pumps
Submersible Sewage Pump
WHR10-21C
$2,545.00This pump is designed for use in light commercial and residential raw sewage applications. This pump will pass a full 2-inch sphere. The recessed vortex impeller provides an unobstructed passage in the volute case which allows these pumps to ...OBSOLETE Learn More -
Barnes Pumps
SGV-2" Discharge
SGV5022L
$6,998.00Rugged and reliable SGV Series pumps provide continuous, maintenance-free operation while effectively handling objects such as plastic, rubber, disposable diapers, towels and clothing.
3, 5 and 7 1/2 HP SGV Series Designed for schools, lift ...
5hp/240v/1ph,3450rpm Learn More -
Barnes Pumps
3SEV submersible sewage pump
3SEV1024DS
$2,431.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 8.5 -
Barnes Pumps
Effluent 1 HP
EH1022L
$2,110.00Submersible Effluent Pump will handle up to 3/4" spherical solids. Cast Iron housing, PP impeller is a 3 vane open style with backside pump out vanes. Motor is PSC with overload protection. 8.1 full load amps. No float switch. -
Barnes Pumps
3SEV submersible trash pump
3SEV524DS
$2,251.00Submersible trash pump. Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 6.3 -
Barnes Pumps
Submersible Grinder Pump
SGVF2022L
$5,381.66Submersible Grinder Pump 110609 2HP 230v
Rugged and reliable SGV Series grinder cutter pumps provide continuous, maintenance-free submersible operation while effectively handling objects such as plastic, rubber, disposable diapers, towels and clo...
230v/1, 2hp Learn More -
Power-Flo Pumps
3 HP Submersible Sewage Pump
PFSE3024
$4,961.68Submersible NON-CLOG pump, 2-1/2" spherical solids handling. Submersible sewage pump. Inboard, Single mechanical seal, Oil Filled Silicon Carbide. 25 Ft. Cord. Pressure grommet for sealingand strain relief. Does not include float switch. All cast...230/1 Learn More -
Barnes Pumps
3SEV Vortex, Double Seal
3SEV724DS
$2,813.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 7.1