Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barnes Pumps
Effluent Pump Step-DS 240v
STEP522DS
$2,307.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle... -
Barnes Pumps
Effluent Pump Step-DS 480v
STEP542DS
$2,445.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle... -
Barnes Pumps
Effluent Pump Step-DS 600v
STEP552DS
$2,445.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle... -
Barnes Pumps
Sewage Pump
3SE514DS
$2,423.55Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 11.6 -
Tsurumi
Tsurumi Submersible Pump
HS2.4S-62
$335.00Tsurumi Submersible Sand Trash Pump. Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used to dewater floodi...
3 180GPH 1/2HP 115v Learn More -
Barmesa Pumps
1/2HP Submersible Dewatering pump
2AHS051
20% Off Special Price $367.20 Regular Price $459.00Submersible Sand Trash Dewatering Pump Manual Submersible Dewatering Pump. Handles algae and other debris up to 3/8″ x 1″ in size.
- BEARINGS - Ball, single row, permanently oil lubricated for 60,000 hours of work. Designed for radial and axial l...
3,180GPH 1/2HP 115v Learn More -
Barmesa Pumps
Automatic submersible dewatering pump
2AHS051A
20% Off Special Price $392.00 Regular Price $490.00Automatic Submersible Dewatering trash Pump.- BEARINGS - Ball, single row, permanently oil lubricated for 60,000 hours of work. Designed for radial and axial loads.
- CORD ENTRY - 15 ft of neoprene cord, sealed against moisture.
- SEAL Design: ...
3,180GPH 1/2HP 115v Learn More -
Barnes Pumps
Submersible Non-Clog Sewage Pump w/ float
SE51A
$1,506.56Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Bolt on threaded discharge flange. REPLACES SE51AU- Handles 2" spherical solids
- Includes 15' Cord w/ plug
- Includes piggy back mechanical float switch...
115v 1/2HP Learn More -
Barnes Pumps
Sump Pump
SE511VF
$1,616.77Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump. -
Barmesa Pumps
Submersible Non Clog Sewage Pump
2BSE511A
$1,113.00Submersible NON-CLOG pump, Sewage up to 2" spherical solids handling. 20 ft. cord. All cast iron. Impeller Design: open, double vane.Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3. Some sort of course screen should be us...1/2Hp 115v 2" Learn More