Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barnes Pumps
Submersible Sewage Sump pump-084608
4SE2894L
$7,050.00Barnes 4" Horizontal Discharge Solids Handling Pump4" horizontal discharge handles up to 3" spherical solidsMotor sizes from .9 to 100HPOpen and enclosed impellers, some with pump-out vanes on backside. Delta impellers available on some modelsV...2.8HP 200/230v/3 Learn More -
Barnes Pumps
Submersible Sump pump-084609
4SE2844L
$7,050.00Barnes 4" Horizontal Discharge Solids Handling Pump4" horizontal discharge handles up to 3" spherical solidsMotor sizes from .9 to 100HPOpen and enclosed impellers, some with pump-out vanes on backside. Delta impellers available on some modelsVol... -
Barnes Pumps
Submersible Pump 3hp
3SE3044L
$5,400.00Barnes Submersible Non-Clog sewage pump 3HP, cast iron construction. 2 vane, open impeller with back pump out vanes. Dynamically balanced. Oil filled squirrel cage induction motor. Oil lubricated upper and lower motor ball bearings for continuo...460v Learn More