Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barnes Pumps
Non-Clog Submersible w/o float
SE594L
$1,706.00Submersible NON-CLOG pump, 2" spherical solids handling. Does not include float switch. 15 ft. cord. All cast iron, including impeller.104881 Learn More -
Barnes Pumps
Sump Pump
SE521
$1,511.91Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 6.2 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump.096755 Learn More -
EBARA Pumps
Ebara Stainless Steel sewage
50DWAU6.4S Dominator
$1,360.52Stainless Steel Ebara pump single Vortex / non-clog impeller. Float switch for automatic operation. EBARA Dominator sewage pumps are designed for reliable pumping of waste water with suspended solids up to 2" in diameter. Stainless steel pump cons...
1/2HP 115V HS Learn More -
EBARA Pumps
Ebara sewage pump
50DWXU6.42
$1,496.00Ebara sewage pump. SS sewage pump vortex / non-clog impeller. No float switch. Ebara sewage pump are a contractor grade pump. Often used as a submersible trash pump. Female threaded outlet.
DWXU models have a Vortex impeller and the DWU models h...
1/2HP 208-230V HS Learn More -
Barnes Pumps
Submersible Non-Clog Sewage Pump w/ switch
SE52AU
$1,766.57Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Discharge has bolt on threaded flange. Replaces SE52A- Handles 2" spherical solids
- Includes 15' Cord and plug
- Includes Piggy back plug mechanica...
230v/1 1/2HP Learn More -
Barnes Pumps
Sump Pump
SE511AU
$1,593.23Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump.096754 1/2HP, 115V automatic intregal float Learn More -
Barnes Pumps
Sump Pump
SE521AU
$1,687.39Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 6.2 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump. -
Barnes Pumps
Sewage Pump
SEV511
$1,599.00Submersible NON-CLOG pump, 2" spherical solids handling. Does not include float switch. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may... -
Barnes Pumps
Sewage Pump
SEV511A
$1,680.00Submersible NON-CLOG pump, 2" spherical solids handling. Does not include float switch. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may... -
Barnes Pumps
Sewage Pump
SEV511AU
$1,759.00Submersible NON-CLOG pump, 2" spherical solids handling. Does not include float switch. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may ent...