Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barmesa Pumps
Submersible Non Clog Sewage Pump
2BSE52SS
$1,129.00Submersible NON-CLOG pump 120v, 2" spherical solids handling. 15 ft. cord. All cast iron. Heavy duty sewage Non-clog water pump. Single phase industrial motor, NEMA B, oil filled, with upper and lower ball bearings. Impeller Design: open, double v...
230v/1 1/2HP 2" Learn More -
Barnes Pumps
Sewage Pump
3SE524DS
$2,521.99Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 5.9 -
Barnes Pumps
Sewage Pump
3SE594DS
$2,785.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 3.2/3.0 -
Barnes Pumps
Sub Non Clog 3" Discharge
3SEV522L
$1,861.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 6.0 -
Barnes Pumps
Non-clog pump, Sgl seal
3SE524L
$1,763.36Submersible non-clog sewage pump designed for typical raw sewage applications. -
Barnes Pumps
Vortex Pump .5hp
2SEV522L
$2,165.68Barnes 2SEV submersible NON-CLOG pump, handles 2" spherical solids due to its unique vortex impeller design. All cast iron heavy duty design. Includes 15ft line cord.1/2HP ,230v Learn More -
Barnes Pumps
Submersible Non-Clog Sewage Pump
SE52
$1,533.31Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Bolt on threaded discharge flange. NO FLOAT switch 104874- Handles 2" spherical solids
- Includes 15' Cord w/o plug
- Pump may NOT be operated DRY f...
230v/1 1/2HP Learn More -
Barnes Pumps
Sump Pump
SE521
$1,511.91Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 6.2 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump.096755 Learn More -
Barnes Pumps
Submersible High Temperature Sewage Pump
SE52HT
$2,137.86Barnes submersible non-clog sewage ejector high-temperature pump is designed for high temperature raw sewage applications.- Handles 2" spherical solids
- Includes 15' Cord w/o plug
-
Barnes Pumps
Submersible High Temperature Sewage Pump w/ float
SE52HTAU
$2,378.61Barnes submersible non-clog sewage ejector high-temperature pump is designed for high temperature raw sewage applications.- Handles 2" spherical solids
- Includes 15' Cord w/o plug
- Includes integral mechanical float switch
104880 Learn More