Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barmesa Pumps
Submersible Non Clog Sewage Pump
2BSE511A
$1,113.00Submersible NON-CLOG pump, Sewage up to 2" spherical solids handling. 20 ft. cord. All cast iron. Impeller Design: open, double vane.Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3. Some sort of course screen should be us...1/2Hp 115v 2" Learn More -
Barmesa Pumps
Submersible Non Clog Sewage Pump
2BSE54SS
$2,375.34Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. All cast iron. Heavy duty sewage Non-clog water pump. Three phase industrial motor, NEMA B, oil filled, with upper and lower ball bearings. Impeller Design: open, double vane.Ma...
460v 1/2HP Learn More -
Barnes Pumps
Sub Non Clog 3" Discharge
3SEV512L
$1,782.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 12.6 -
Barnes Pumps
Sewage pump, Sgl seal
3SE514L
$1,674.55Submersible non-clog sewage pump designed for typical raw sewage applications. Complete solid cast Iron construction.1/2HP 115v Learn More -
Barnes Pumps
Sub Non Clog 3" Discharge
3SEV522L
$1,861.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 6.0 -
Barnes Pumps
Sub Non Clog 3" Discharge
3SEV592L
$2,187.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 5.8/5.3 -
Barnes Pumps
Automatic 2" Sewage Pump
SE511A
$1,504.42Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump.115v/1 1/2HP 096753 automatic Learn More -
Barnes Pumps
Non-clog pump w/ dbl seal .5hp
3SEV512DS
$2,505.00Barnes sewage Submersible NON-CLOG vortex Pump, handles 2" spherical solids, Vortex recessed impeller, double seal. Designed for raw sewage, dewatering and wet mud applications. All cast iron construction. 15 ft. cord and plug. -
Barnes Pumps
Subm. High Temp. Sewage Pump
SE51HT
$2,041.56Barnes Manual Submersible non-clog sewage ejector high temperature pump is designed for high temperature raw sewage applications.104876#- Handles 2" spherical solids
- Includes 15' Cord w/ plug
- No Float
1/2HP 115V Learn More -
Barnes Pumps
Non-clog pump, Sgl seal
3SE524L
$1,763.36Submersible non-clog sewage pump designed for typical raw sewage applications.