Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barmesa Pumps
Submersible Non Clog Sewage Pump
2BSE52SS
$1,129.00Submersible NON-CLOG pump 120v, 2" spherical solids handling. 15 ft. cord. All cast iron. Heavy duty sewage Non-clog water pump. Single phase industrial motor, NEMA B, oil filled, with upper and lower ball bearings. Impeller Design: open, double v...
230v/1 1/2HP 2" Learn More -
Barnes Pumps
Effluent Pump Step-DS 240v
STEP522DS
$2,307.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle... -
Barnes Pumps
Non-clog pump, Sgl seal
3SE524L
$1,763.36Submersible non-clog sewage pump designed for typical raw sewage applications. -
Barnes Pumps
Vortex Pump .5hp
2SEV522L
$2,165.68Barnes 2SEV submersible NON-CLOG pump, handles 2" spherical solids due to its unique vortex impeller design. All cast iron heavy duty design. Includes 15ft line cord.1/2HP ,230v Learn More -
Barnes Pumps
Effluent Pump Step-SS-240v
STEP522SS
$1,911.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle... -
Barnes Pumps
Submersible Non-Clog Sewage Pump
SE52
$1,533.31Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Bolt on threaded discharge flange. NO FLOAT switch 104874- Handles 2" spherical solids
- Includes 15' Cord w/o plug
- Pump may NOT be operated DRY f...
230v/1 1/2HP Learn More -
Barnes Pumps
Sump Pump
SE521
$1,511.91Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 6.2 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump.096755 Learn More -
Barnes Pumps
Submersible Non-Clog Sewage Pump w/ switch
SE52AU
$1,766.57Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Discharge has bolt on threaded flange. Replaces SE52A- Handles 2" spherical solids
- Includes 15' Cord and plug
- Includes Piggy back plug mechanica...
230v/1 1/2HP Learn More -
Barnes Pumps
Sump Pump
SE521AU
$1,687.39Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 6.2 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump. -
Barnes Pumps
Sewage Pump
SEV521
$1,686.00Submersible NON-CLOG pump, 2" spherical solids handling. Does not include float switch. 15 ft. cord. FLA 6.2 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may ...