Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
EBARA Pumps
SS Trash pump .5hp
50DWXU6.4S2
$1,488.00SS sewage pump vortex / non-clog impeller. Stainless steel submersible trash pump, 230v, 1/2HP. 25FT power cord. Motor has built in overload protection.
EBARA’s Dominator sewage pumps are designed for reliable pumping of waste water with suspende...
1/2HP 208-230V HS Learn More -
Barnes Pumps
Sewage pump w/ vertical float
SEV412VFT
$883.00Barnes Submersible NON-CLOG vortex sewage pump,
2" solids trash handling.
Includes attached vertical float with piggy-back style plug , PVC, snap action. 20 ft. cord. All cast iron, including impeller. Some sort of course screen should be used o...
Vortex impeller submersible trash pump Learn More -
Myers Pumps
Light comm. sewage
MW50-11
$1,134.00This pump provides big performance in a small package. The enclosed two-vane impeller provides the flow and head required for residential and light commercial seage applications, and passes a full 2" diameter solid. This pump is constructed of on... -
Barnes Pumps
Submersible Non-Clog Sewage Pump w/ float
SE51A
$1,506.56Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Bolt on threaded discharge flange. REPLACES SE51AU- Handles 2" spherical solids
- Includes 15' Cord w/ plug
- Includes piggy back mechanical float switch...
115v 1/2HP Learn More -
Barnes Pumps
Sump Pump
SE511VF
$1,616.77Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump. -
Barmesa Pumps
Submersible Non Clog Sewage Pump
2BSE511A
$1,113.00Submersible NON-CLOG pump, Sewage up to 2" spherical solids handling. 20 ft. cord. All cast iron. Impeller Design: open, double vane.Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3. Some sort of course screen should be us...1/2Hp 115v 2" Learn More -
Barmesa Pumps
Submersible Non Clog Sewage Pump
2BSE54SS
$2,375.34Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. All cast iron. Heavy duty sewage Non-clog water pump. Three phase industrial motor, NEMA B, oil filled, with upper and lower ball bearings. Impeller Design: open, double vane.Ma...
460v 1/2HP Learn More -
Barnes Pumps
Sewage pump, Sgl seal
3SE514L
$1,674.55Submersible non-clog sewage pump designed for typical raw sewage applications. Complete solid cast Iron construction.1/2HP 115v Learn More -
Barnes Pumps
Automatic 2" Sewage Pump
SE511A
$1,504.42Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump.115v/1 1/2HP 096753 automatic Learn More -
Barnes Pumps
Non-clog pump w/ dbl seal .5hp
3SEV512DS
$2,505.00Barnes sewage Submersible NON-CLOG vortex Pump, handles 2" spherical solids, Vortex recessed impeller, double seal. Designed for raw sewage, dewatering and wet mud applications. All cast iron construction. 15 ft. cord and plug.