Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barmesa Pumps
Submersible Non Clog Sewage Pump
2BSE511A
$1,113.00Submersible NON-CLOG pump, Sewage up to 2" spherical solids handling. 20 ft. cord. All cast iron. Impeller Design: open, double vane.Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3. Some sort of course screen should be us...1/2Hp 115v 2" Learn More -
Barnes Pumps
Sewage pump, Sgl seal
3SE514L
$1,674.55Submersible non-clog sewage pump designed for typical raw sewage applications. Complete solid cast Iron construction.1/2HP 115v Learn More -
Barnes Pumps
Automatic 2" Sewage Pump
SE511A
$1,504.42Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump.115v/1 1/2HP 096753 automatic Learn More -
Barnes Pumps
Non-clog pump w/ dbl seal .5hp
3SEV512DS
$2,505.00Barnes sewage Submersible NON-CLOG vortex Pump, handles 2" spherical solids, Vortex recessed impeller, double seal. Designed for raw sewage, dewatering and wet mud applications. All cast iron construction. 15 ft. cord and plug. -
Barnes Pumps
Subm. High Temp. Sewage Pump
SE51HT
$2,041.56Barnes Manual Submersible non-clog sewage ejector high temperature pump is designed for high temperature raw sewage applications.104876#- Handles 2" spherical solids
- Includes 15' Cord w/ plug
- No Float
1/2HP 115V Learn More -
Barnes Pumps
Submersible Trash pump
2SEV514L
$1,660.64Submersible trash pump. Barnes 2SEV submersible NON-CLOG sewage vortex pump, handles 2" spherical solids due to its unique vortex impeller design. All cast iron heavy duty design. Includes 15ft line cord. Trash pump can be used in many submersi...115v 1/2HP Commercial Sewage pump Learn More -
Barnes Pumps
Sewage Pump
SEV511VF
$1,785.00Submersible NON-CLOG pump, 2" spherical solids handling. Does not include float switch. 15 ft. cord. FLA 12.0 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may... -
Barnes Pumps
Vortex Pump .5hp
2SEV512L
$2,067.24Barnes 2SEV submersible NON-CLOG vortex pump, handles 2" spherical solids due to its unique vortex impeller design. All cast iron heavy duty design. Includes 15ft line cord. High head sewage pump submersible. 3450 RPM.Pump is CSA listed only
-
Barmesa Pumps
Vortex Effluent Pump .5hp
BPEV512
$785.00Submersible Effluent pump 1/2hp
Designed for handling sewage effluent in typical septic tank / effluent applications and gray water. Vortex impeller design to enhance clog resistance. Can also be used as a high head sump pump.
Submersible Septic...
115v 1/2HP Effluent Manual 2" Learn More -
EBARA Pumps
SS sewage .5hp
50DWXFU6.4S
$1,404.08SS sewage pump vortex/non-clog impeller. No float switch.1/2HP 115V HS Learn More