Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barnes Pumps
Sewage Pump
3SE2044DS
$5,550.00Barnes Submersible Non-Clog double seal sewage pump, cast iron construction. 2 vane, open impeller with back pump out vanes. Dynamically balanced. Oil filled squirrel cage induction motor. Oil filled seal chamber with secondary exclusion seal. ...460v 3" 2hp Learn More -
Barnes Pumps
Vortex Pump 2hp
2SEV2042L
$3,056.99Barnes Submersible NON-CLOG vortex sewage pump, 2" spherical solids handling. 20 ft. cord. All cast iron, bronze vortex impeller.Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump....
2hp/460v/3ph Learn More