My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 831-840 of 2664

Set Descending Direction
per page
  1. Finish Thompson Pumps (FTI)

    FTI Magnetic pump Kynar

    DB15V-4-M208

    $5,072.44
    DB15V-4-M208: FTI Magnetic coupled pump. Finish Thompson line of chemical handling pumps featuring their state of the art sealless design
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%...
    3HP, 1phase Learn More
  2. Darley Pumps

    Portable Marine Fire Pump 64HP

    HE 64RPM Hercules

    $28,905.41

    Darley Marine Fire Pump has always been a leader in portable fire pump design. Includes metal frame, control panel, jet coated exhaust, painted engine, 316SS shaft and hard anodized pump casing.The High-Volume Fire Pump is easy-starting, portable....

  3. Pacer Pumps

    NSF Water Pump

    IPW2WL-D3.0C

    $2,515.00

    NSF Sanitary potable water & Food Grade electric pump.

    Self-Priming SS Centrifugal Pumps, Pump casing is made of 304 stainless steel. Internal parts are glass reinforced polypropylene. All pumps include a built-in check valve.

    These pumps are st...

    3HP 230/460v/3 Stainless 2" Learn More
  4. Pacer Pumps

    NSF Potable Water Pump Honda Gas Engine

    IPW2WL-E5HCP

    $2,481.70

    NSF Potable Water Pump Honda Gas Engine.

    High-Flow, Stainless Steel Self-Priming Pump for Potable Water Systems

    The Pacer IPW2WL-E5HCP is a food-grade, self-priming centrifugal pump powered by a reliable Honda gas engine. Designed specifically f...

    Honda 5HP SS 2" Learn More
  5. Pacer Pumps

    NSF Water Pump

    IPW2WL-E6VCP

    $2,012.50

    NSF Water Pump Briggs Gas Engine.

    Stainless Steel Self-Priming Centrifugal water Pump Briggs gas engine powered, Pump casing is made of 304 stainless steel. Internal parts are glass reinforced polyester or glass reinforced polypropylene. All pump...

    Briggs 6.5HP SS 2" Learn More
  6. MP Pumps

    Petroleum 10

    38349

    $5,437.50

    Petroleum 10 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Standard features include SS drive sleeve, SS fasteners, renewable wear plate, and a semi-open dynam...

    Ductile Iron Hydraulic 2" Learn More
  7. Berkeley Pumps

    B8GPBM Centrifugal Pump

    B56000

    $35,680.00

    The type B, pumps are built for continuous dependable performance and ease of repair. Ideal for transfer applications, standby fire protection, dewatering and irrigation. Flows to 3000 GPM, Heads to 60 feet.

  8. Berkeley Pumps

    Centrifugal Water Pump

    B71947S

    $9,270.00

    10HP End suction centrifugal pump with flanges, close coupled with mechanical seal. Used for commercial swimming pools, irrigation, fountains and other water transfer applications. 

    Where a large volume of water is needed, in flooded suction ...

    10HP 230v/1 Flanged Learn More
  9. March Pumps

    Bronze Magnetic Drive Circulating Pump

    0821-0084-0700

    $646.88
    The ultimate in reliability in circulating pumps for industrial/hydronic/solar applications. Depending on application, March hydronic pumps are available in a variety of materials, including plastic, bronze, stainless steel, and cast iron. Spec...
  10. Pacer Pumps

    NSF Water Pump kit Gas Engine

    IPW2WL

    $1,265.00

    NSF Water Pump KIT for Gas Engine.

    Stainless Steel Self-Priming Centrifugal water Pump for gas engine powered, Pump casing is made of 304 stainless steel. Internal parts are glass reinforced polyester or glass reinforced polypropylene. All pumps ...

    Kit for Gas Engine SS 2" Learn More
View as List Grid

Items 831-840 of 2664

Set Descending Direction
per page