My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 741-750 of 929

Set Descending Direction
per page
Page
  1. Finish Thompson UC1516AECSSVF5872124 ULTRAchem ANSI DIM. Mag Drive pump w/ 10hp motor

    Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump w/ 10hp motor

    UC1516AECSSVF5872124
    $9,695.65
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydraulic radial t...
    10HP Learn More
    Add to Wish List Add to Compare
  2. Finish Thompson UC326AECSSVF4752131 ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor

    Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor

    UC326AECSSVF4752131
    $11,261.46
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydraulic ...
    Learn More
    Add to Wish List Add to Compare
  3. MP 30170 HTO 120 Pump Tempuflo

    MP Pumps

    HTO 120 Pump Tempuflo

    30170
    $6,137.50

    Hot Oil Pump up to 650F

    with horizontal discharge Features:

    • Utilizes an isolated seal chamber, effectively cooled by a fan clamp, which couples the unit to the shaft of a c-frame motor
    • Standard carbon/ceramic mechanical seal with FKM elastome...
    5.96" imp. 5HP 230/460v Learn More
    Add to Wish List Add to Compare
  4. MP - 35837: HTO180 thermal heat transfer pumps

    MP Pumps

    HTO180 Pump

    35837
    $7,275.00

    HTO180 is a patented, unique centrifugal pump designed for high temperature applications up to 650F, such as the plastics, chemical, food and processing industries. Tthermal heat transfer pumps The pump can be used in horizontal or vertical positi...

    10HP 230/460v Learn More
    Add to Wish List Add to Compare
  5. MP 34239 HTO 300 High Temperature Pump w/ motor

    MP Pumps

    HTO 300 High Temperature Pump w/ motor

    34239
    $9,762.50

    Centrifugal Hot Oil High Temperature Pump Features:

    • Applications: Plastics, Chemical, Food, and Processing Industries which require pumping of high temperature fluids like glycol
    • Utilizes an isolated seal chamber, effectively cooled by a fan c...
    7.5HP 5.5" Learn More
    Add to Wish List Add to Compare
  6. MP 35263 HTO 300 Pump w/ motor High temperature

    MP Pumps

    HTO 300 Pump w/ motor High temperature

    35263
    $10,262.50

    Centrifugal Hot Oil High temperature Pump Features:

    • Applications: Plastics, Chemical, Food, Asphalt, and Processing Industries which require pumping of high temperature fluids
    • Utilizes an isolated seal chamber, effectively cooled by a fan clamp,...
    15HP 6.62" Learn More
    Add to Wish List Add to Compare
  7. MP 35240 HTO 300 Pump w/ motor

    MP Pumps

    HTO 300 Pump w/ motor

    35240
    $12,412.50
    Hot Oil Pump HTO300

    Centrifugal Hot Oil Pump Features:

    • Applications: Plastics, Chemical, Food, and Processing Industries which require pumping of high temperature fluids
    • Utilizes an isolated seal chamber, effectively cooled by a fan clamp, which...
    15HP 7" Imp Learn More
    Add to Wish List Add to Compare
  8. MP 29566 HTO 80 Pump w/ motor

    MP Pumps

    HTO 80 Pump w/ motor

    29566
    $3,900.00

    HTO 80 Centrifugal Hot Oil Electric Pump

    Features:

    • Applications: Plastics, Chemical, Food, and Processing Industries which require pumping of high temperature fluids
    • Utilizes an isolated seal chamber, effectively cooled by a fan clamp, which ...
    1HP 230/460v Learn More
    Add to Wish List Add to Compare
  9. MP 30082 Hot Oil Pump 80 Pump w/ motor

    MP Pumps

    Hot Oil Pump 80 Pump w/ motor

    30082
    $3,987.50

    Centrifugal Hot Oil Pump HTO

    Features:

    • Applications: Plastics, Chemical, Food, and Processing Industries which require pumping of high temperature fluids
    • Utilizes an isolated seal chamber, effectively cooled by a fan clamp, which couples the ...
    230/460V 1.5HP Learn More
    Add to Wish List Add to Compare
  10. MP 29431 HTO 80 Pump w/ motor

    MP Pumps

    HTO 80 Pump w/ motor

    29431
    $4,750.00

    HTO TempuFlo Pump.

    Centrifugal Hot Oil Pump Features:

    • Applications: Plastics, Chemical, Food, and Processing Industries which require pumping of high temperature fluids
    • Utilizes an isolated seal chamber, effectively cooled by a fan clamp, whi...
    2HP 230/460v Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 741-750 of 929

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Phase (Ø) Three (3) Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 825 items
  2. Magnetic Coupled (Seal-less) Pumps 104 items
Voltage (Range)
  1. 110-120 1 item
  2. 208-230/460//190-220/380-415 12 items
  3. 220-240/460-480 450 items
  4. 110-120/220-240 6 items
  5. 220-240 26 items
  6. 208-240/460 401 items
  7. 230/460 1 item
  8. 460-480 15 items
Horse Power (HP)
  1. 1/3 11 items
  2. 1/2 83 items
  3. 3/4 98 items
  4. 1 103 items
  5. 1 1/2 116 items
  6. 2 86 items
  7. 2 1/2 6 items
  8. 3 140 items
  9. 5 104 items
  10. 7 1/2 68 items
  11. 10 38 items
  12. 15 28 items
  13. 20 18 items
  14. 25 6 items
  15. 30 5 items
  16. 40 2 items
  17. 50 4 items
  18. 75 1 item
  19. 100 1 item
inlet size
  1. Less than 1in 41 items
  2. 1in 47 items
  3. 1 ¼" 201 items
  4. 1 ½" 217 items
  5. 2in 233 items
  6. 2 ½" 25 items
  7. 3" 50 items
  8. 4" 22 items
  9. 5" 1 item
  10. 8" 2 items
PRICE $
$  -  $
Manufacturer
  1. American Stainless 87 items
  2. AMT Pumps 1 item
  3. Aquatec Pumps 1 item
  4. Barmesa Pumps 9 items
  5. Berkeley Pumps 51 items
  6. Calpeda Pumps 1 item
  7. EBARA Pumps 33 items
  8. Finish Thompson Pumps (FTI) 89 items
  9. Gorman-Rupp Pumps 3 items
  10. Griswold Pumps 16 items
  11. Hypro Pumps 35 items
  12. Little Giant Pumps 2 items
  13. March Pumps 20 items
  14. MP Pumps 83 items
  15. MTH Pumps 114 items
  16. Munro Pumps 8 items
  17. Myers Pumps 35 items
  18. Oberdorfer Pumps 12 items
  19. Pacer Pumps 27 items
  20. Pedrollo Pumps 11 items
  21. PumpBiz 6 items
  22. RS Corcoran 8 items
  23. Serfilco 66 items
  24. Sta-Rite 50 items
  25. Webtrol 161 items
Motor
  1. ChemDuty 23 items
  2. EXP (C 1, Gp C/D & C11, Gp F/G) 27 items
  3. EXP (C 1, Gp C/D) 30 items
  4. ODP 407 items
  5. TEFC 434 items
  6. TENV 1 item