My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 61-70 of 889

Set Descending Direction
per page
  1. Sta-Rite

    JB Centrifugal Pump High Head 2-1/2HP

    JBHHG-53S

    $2,634.00
    This pump has a heavy-duty cast iron construction with silicon bronze impeller.
    • Applications: Water systems and sprinkling for homes, farms and industry
    • Drain Port: Provided for easy winterizing
    • Easy Serviceability: Includes replaceable wear rin...
  2. Sta-Rite

    JB Centrifugal Pump High Head 2HP

    JBHG-52S

    $2,282.00
    This pump has a heavy-duty cast iron construction with silicon bronze impeller.
    • Applications: Water systems and sprinkling for homes, farms and industry
    • Drain Port: Provided for easy winterizing
    • Easy Serviceability: Includes replaceable wear rin...
  3. Sta-Rite

    JB Centrifugal Pump High Head 3/4HP

    JBHD-62S

    $1,537.00
    Sta-Rite - JBHD: JB Centrifugal Pump High Head 3/4HP brass impeller. This pump has a heavy-duty cast iron construction with silicon bronze impeller. Replace Myers CT07B
    • Applications: Water systems and sprinkling for homes, farms and industry
    • ...
    3/4HP 115/230v Brass impeller Learn More
  4. Sta-Rite

    JB Centrifugal Pump Med Head 1/2HP

    JBMC-56S

    $1,818.00
    This pump has a heavy-duty cast iron construction with silicon bronze impeller.
    • Applications: Water systems and sprinkling for homes, farms and industry
    • Drain Port: Provided for easy winterizing
    • Easy Serviceability: Includes replaceable wea...
  5. Sta-Rite

    Sta-rite Centrifugal Pump

    CCHH

    $5,044.00

    Sta-rite Centrifugal Pump CCHH, high head. This pump is compact, but rugged. With optional basket strainer often used as a commercial pool pump.

    • Applications: Irrigation, water systems, sprinkling for homes, farms and industry
    • Base: Heavy gaug...
  6. Finish Thompson Pumps (FTI)

    DB Magnetic pump

    DB10P-M218

    $1,933.15
    Magnetic coupled pump. Introducing the DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, the DB serie...
    1HP 115/230v Polypro Learn More
  7. Finish Thompson Pumps (FTI)

    FTI DB11 Magnetic coupled pump

    DB11P-M216

    $2,899.09

    Magnetic coupled pump.

    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation...
    2HP 115/230v PolyPro Learn More
  8. Finish Thompson Pumps (FTI)

    FTI DB8 pump

    DB8P-M226

    $1,317.07
    Magnetic coupled pump. Introducing the DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, the DB serie...
    1/2HP 115/230v Learn More
  9. Finish Thompson Pumps (FTI)

    FTI DB8 pump

    DB8V-M226

    $1,660.09
    FTI DB8 Kynar pump is Magnetic coupled sealless. DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, th...
    1/2HP 115/230v TEFC Kynar Learn More
  10. MP Pumps

    316SS pump

    35666

    $827.50

    CFX 75---3/4" x 3/4" End Suction Centrifugal Pump 316SS Pump for chemicals, salt water or many other liquids where corrosion is a problem.

    Not self priming

    Marine Boat air conditioning is a big market for these pumps along with heavy equipment. ...

    115v 1/6HP 3/4" Learn More
View as List Grid

Items 61-70 of 889

Set Descending Direction
per page