Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
PumpBiz
5GPM Cast Iron Booster Pump
G5B8
$1,037.00PumpBiz booster pumps increase water pressure from city mains or private water systems. Especially important for proper operations of water softeners and filtration equipment. Units pump water from cisterns, tanks, or ponds, with suction lifts up... -
PumpBiz
5GPM SS Booster Pump
E5B12S16
$715.00PumpBiz booster pumps increase water pressure from city mains or private water systems. Especially important for proper operations of water softeners and filtration equipment. Units pump water from cisterns, tanks, or ponds, with suction lifts up... -
Pedrollo Pumps
Shallow Well Pump 1.5HP
JSWQ15c16p
$1,383.45Shallow well pump. Water well pump for shallow wells of less than 25FT. Self priming jet pump, high pressure / head. Robust and effi cient pump with a Cast Iron and Alluminium combination. Perfect Pump for Residential Sprinkler Systems. They are ...Lawn sprinkler pump often also. Learn More -
Sta-Rite
J Centrifugal Pump Med Head 2HP
JMG-41L
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring an...
230v/1 Learn More -
Jabsco Pumps
Plastic Flexible Impeller Pump
17430-0003
$1,730.00Jabsco's self-priming plastic flexible impeller pump is designed for transfers, circulation, spill returns, filtration and filling line use. Easily handles pure solutions, foaming liquids, emulsions, suspended solids, gels and metallic contam...115v 1/2HP Learn More -
Jabsco Pumps
Plastic Flexible Impeller Pump FKM
12290-0004
$971.53Jabsco's self-priming plastic flexible impeller pump is designed for transfers, circulation, spill returns, filtration and filling line use. Easily handles pure solutions, foaming liquids, emulsions, suspended solids, gels and metallic contamin...115v 1/6HP Learn More -
Sta-Rite
1 1/2hp jet pump
HMSF-1FL
Sta-rite water pump. Sprinkler Irrigation pump or water well pump. FEATURESAutomatic Pressure Regulator –Faster-acting and quieter, design eliminates “hunting” for correct drive pressure. New improved stem and guide are precisely molded to assur...
115/230v Convertable Learn More -
Sta-Rite
3/4hp jet pump
HMSD-1FL
FEATURES2 Stage Automatic Pressure Regulator –Faster-acting and quieter, design eliminates “hunting” for correct drive pressure. New improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells...
3/4hp Convertable 2 stage Learn More -
Sta-Rite
CI Shallow well Pump 3/4
FND (7FN)
Cast Iron shallow well jet pump. 3/4 HP. Often also used on commercial vessels like tug boats for showers / kitchen grey water.
- Superior performance at depths to water of 25' or less.
- Rugged, heavy-duty cast iron pump housing.
- Ready-to-instal...
Cast Iron shallow well jet pump. 3/4 HP Learn More -
Sta-Rite
Shallow Jet pump
PND-10
Shallow well jet pump 3/4HP
FRP (Polypro) engineering plastic pump is corrosion and abrasion resistant. Built in jet is corrosion resistant Noryl nozzle and venturi. UL/CSA listed A.O. Smith motor with thermal overload. 3/4HP. Pressure switch set...
3/4HP 115V Learn More
