My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 361-370 of 931

Set Descending Direction
per page
  1. Hypro Pumps

    High Head Pump

    CHMSV673

    $3,216.80
    316 Stainless Steel High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications...

    SS,3HP,3ph Learn More
  2. Pacer Pumps

    SE3LB D5.0C

    58-13L2-D5.0C

    $1,830.80

    3" S pump close coupled to a TEFC 3P electric motor. Self priming FRP polyester plastic resists abrasive particles, good for most water, salt water, waste water, mild acids and bases transfer applications. Widely used to transfer and spray de-icin...

    3" 5HP/3ph Learn More
  3. Sta-Rite

    Three Phase Booster Pump

    HP7C3-02

    $2,086.00 $2,086.00 Click for price
    This Three Phase Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydrauli...
    230/460v Learn More
  4. Hypro Pumps

    Bronze centrifugal Pump

    COMBB223

    $1,437.16

    Bronze pump by Shurflo, centrifugal pump. Designed for continuous-duty low pressure OEM, Industrial Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Mechanical sealed. 

    This seri...

    1/2HP 230/460v/3 Learn More
  5. Sta-Rite

    Booster Pump

    HPS7C3

    $1,704.92 $1,704.92 Click for price
    This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic componen...
    230/460v 1/2hp Learn More
  6. Sta-Rite

    Centrifugal Pump High Head

    C2MPS B53617S

    $3,953.00
    Type C Series Straight Centrifugal The Type C Pump is a compact, horizontal, single stage, centrifugal pump close-coupled to an electric motor. The removal of readily accessible bolts (back pull-out construction), permits the removal of the pum...
    3HP 230v/460v/3 Learn More
  7. Sta-Rite

    Booster Pump 3/4HP

    HP7D3-02

    $2,341.00 $2,341.00 Click for price
    This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components...
    230/460 3/4hp Learn More
  8. MP Pumps

    2CT-3HS Trash Pump w/ motor

    44203

    $6,612.50
    2CT Jaeger Trash Pumps, self-priming, cast iron. Close-coupled TEFC electric motor drive provided.

    The Model 2CT is a 3" x 3" Self Priming Trash Pump which is close coupled. This unit has cast iron construction with a ductile 5.63" iron impell...

    10HP 230/460v TEFC Learn More
  9. March Pumps

    PP Magdrive Pump

    TE-8C-MD 3PH

    15% Off Special Price $4,162.56 Regular Price $4,897.13

    March TE-8C-MD Magdrive pump.

    Magnetic Series 8 chemical pumps for industrial process applications, with standard wetted parts of glass-filled polypropylene, carbon-filled Kynar & 316 stainless steel, are the ideal choice for handling difficult l...

    3HP 230/460v

    Learn More
  10. MTH Pumps

    Turbine Pump 3/4HP

    T41BAB753TB

    $1,236.12
    Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well a...
View as List Grid

Items 361-370 of 931

Set Descending Direction
per page