Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Sta-Rite
JB Centrifugal Pump High Head 1HP
JBHE3-63S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
Sta-Rite
JB Centrifugal Pump High Head 2-1/2HP
JBHHG3-53S
This pump has a heavy-duty cast iron construction with silicon bronze impeller. Discontinued due to DOE efficiency standards of small pumps.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for ea...
-
Sta-Rite
JB Centrifugal Pump Med Head 1/2HP
JBMC3-56S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
Finish Thompson Pumps (FTI)
FTI DB6 pump
DB6HP-M227
$1,325.00Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, fl...
1/2HP 230/460v PolyPro Learn More -
Serfilco
H2X1.5KE1V(M8)-D1.5
42-0318A
$3,389.39PVDF/KYNAR Centrifugal Horizontal Mechanical Sealed Pump 1.5 Hp Series “HE” Horizontal Pumps feature “total” chemical resistance with non-metalic construction of all wetted components. The molded, enclosed impellers are designed to provide maximu...1 1/2HP 208-230/460V TEFC Learn More -
Webtrol
Corrosion Resistant Pump
PC50R-3PH
$2,175.95- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1/2HP 208-230/460V ODP Learn More -
Webtrol
Corrosion Resistant Pump
PC75R-3PH
$1,507.81Webtrol PC Series Centrifugal pump iscompletely corrosion resistantthrough the use of 316 stainlesssteel and high impact, glassreinforced Noryl. The compact,light weight design of the PCSeries Centrifugal makes itideal for cabinet installationa...3/4HP 208-230/460V ODP Learn More -
Webtrol
Corrosion Resistant Pump
PC100R-3PH
$2,329.44Corrosion resistant Centrifugal Pump.- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel impeller insert & wear ring
1HP 208-230/460V ODP Learn More -
Webtrol
Corrosion Resistant Pump
PC150R-3PH
$2,593.53- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1 1/2HP 208-230/460V ODP Learn More -
Webtrol
Corrosion Resistant Pump TEFC motor
PC33R-3PHT
$2,589.00- Close coupled
- 316 Stainless steel
- Glass Reinforced Noryl
- Ability to rotate the discharge in 90 degree increments.
1/2HP 208-230/460V ODP Learn More
